Sit in the vehicle and close all the doors. Insert the key in the ignition and turn the key to the "Run" position. The "Run" position is before the "Start" position. The vehicle motor is not running in this position. Press the vehicle information button located on the Driver Information Center. Scroll through the display until you see the line "PRESS SET TO RELEARN REMOTE KEY." Press the "Set" button. Scroll through the display until "REMOTE KEY LEARNING ACTIVE" appears. Press and hold the "Lock" and "Unlock" buttons simultaneously on the remote that you want to program for 10 seconds. Release the buttons. A chime sound indicates that the remote is programmed to the vehicle's system. Turn the ignition key to the "Off" position to exit the programming mode. Test the newly programmed remote by pressing the "Unlock" and "Lock" buttons. Repeat the programming process if the remote is not operational.