To change the battery on a Timex watch, open the battery holding panel on the back of the Timex watch. Remove the old battery, insert the new battery, and place the holding panel back onto the watch.Know More
Find the four screws on the back holding panel. Unscrew them with a jeweler's or eyeglass screwdriver.
Slide the flat end of a screwdriver between the panel and the watch. Pry gently to push the holding panel off the back of the Timex.
Pick up the Timex, and flip it over to drop the old battery out of the housing. Drop the old battery into a cup or hand when flipping the Timex over.
Place the Timex on a flat surface, and put the new battery into the housing. Push down to snap the battery into place.
Place the panel onto the Timex. Add a screw to each hole, and align the holes on the back of the Timex. Turn each screw using the screwdriver until the screw is tight in its housing. Tighten each screw one more half-turn to lock the holding panel into position.
A watch battery replacement kit comes with all of the tools necessary to open the watch's back, remove its battery, handle its different components and replace the batteries. The container material may vary, but watch battery replacement kit containers are typically made of leather or faux leather and have zippers and elastic bands to help keep tools from shifting around. Some kits also include a list of the included tools.Full Answer >
To replace a watch battery, open the band, place the watch in a vice, open up the back, and remove the old battery. Clean out the battery compartment, place the new battery inside, and close the watch.Full Answer >
Open the back of a wrist watch using either a sharp-edged tool, a friction tool or a screwdriver, depending on the type of watch back you have. Screw-down watches require a friction tool, screw-back watches require a screwdriver, and snap-off watch backs require a sharp-edged tool.Full Answer >
To change the battery in a Skagen watch, remove the back case of the watch and replace the old battery with a new one. A small flat screwdriver is required for this.Full Answer >