The measurement between the top of the waistband to the middle of the crotch seam is considered the rise on a pair of pants. Purchasing pants with the desired rise is important because tailoring this area is often difficult and expensive.
Laying the pants flat, line up the front and back waistlines so that they are even.
To measure the front rise on a pair of paints, measure the distance from the top of the waistband to the center of the crotch seam on the front of the pants by using measuring tape or a ruler.
To measure the back rise on a pair of pants, flip the pants over and measure the distance from the top of the waistband to the center of the crotch seam on the back of the pants.
Pressing a crease in a pair of pants involves making sure the inseam lines are laid perfectly on top of each other before pressing. Setting the iron to the right temperature for the fabric is crucial. The Art of Manliness points out that pants must be clean before pressing, or the heat from the iron is likely to set any stains permanently.Full Answer >
Men's dress pants should be hemmed so they "break," or crease very slightly, just above the top of the shoe, covering the shoe tops. The back of the hemline should come down to the sole of the shoe.Full Answer >
Harem pants are becoming increasingly trendy and they are worn best with a fitted top. Fun, colorful or elegant accessories like necklaces, wide belts, and bracelets can be added in order to create a chic and fashionable look.Full Answer >
Begin by washing the pants according to manufacturer's instructions to loosen the crease. Spray the pants with distilled water, starch, vinegar or rub them down with a bar of soap. Iron out the crease.Full Answer >