Turn the watch onto its side and place it on a flat surface. Position a micro screwdriver that matches the width of the watch's pin over the right pin of the link to be removed. Lift both sides of the link and gently push the pin down with the screwdriver.Know More
If the watch is a split-pin design, the pin falls out the other end. Repeat the process on the left-hand side of the link. Turn the watch to the left and grip the link. Insert a micro screwdriver into the right side of the link just above the pin. Rotate the screwdriver to the left repeatedly. Loosen the grip on the screwdriver as the screw begins to move upward. Continue until it is removed, and repeat on the left side of the link.
Fossil retailers and retail stores remove watch links for customers. Fossil employees are trained to help with the removal process.Learn more about Watches
It is possible to get the crystal replaced on a Fossil watch by sending the watch to Fossil for repair. However, replacement of the crystal is not covered under Fossil's warranty.Full Answer >
The battery size for a Fossil watch varies by model. Some models use a 371 battery, according to Tmoot. To determine the battery type, note the number on the old battery.Full Answer >
The Fossil watch brand comes with a warranty that lasts for 11 years after purchase, and that covers the fixing of manufacturing defects and material defects. The parts of the watch that the warranty covers include the watch's hands and dial, and the watch movement.Full Answer >
To remove scratches from a watch face, tape the bezel, then rub diamond paste on the face using a clean cloth. Wipe the paste off, and repeat the process until the scratches are gone. You need diamond paste in 3 microns and .25 micron, a clean cloth, and tape.Full Answer >