To remove scratches from a watch face, tape the bezel, then rub diamond paste on the face using a clean cloth. Wipe the paste off, and repeat the process until the scratches are gone. You need diamond paste in 3 microns and .25 micron, a clean cloth, and tape.Know More
Tape the bezel and all areas around the watch face with narrow masking tape to protect them from the diamond paste.
Put a small amount of the 3-micron diamond paste onto a cotton swab. Spread the paste all over the watch face, being careful around the edges where the face meets the bezel.
Using a soft clean cloth, gently rub the diamond paste in circles around the watch face, making sure to concentrate on the areas with the scratches. Continue to rub the face until you see the scratches disappear.
Wipe away the excess diamond paste. Put a small amount of the .25-micron diamond paste onto the watch face, then rub gently using the other side of the cloth. Continue to rub the face until it shines. Wipe off the excess, inspect the face, and repeat the process if scratches remain. Remove the tape when you are finished.
Timex Indiglo watches illuminate at the touch of a button to allow individuals to read the watch face while in the dark. The watch uses a technique called electroluminescence to evenly illuminate a zinc sulfide and copper compound on thewatch dial.Full Answer >
The rotating bezel on a wristwatch works in several ways, and these include calculating elapsed time for divers, measuring the distance per time unit increments and measuring the distance between a wearer and an event that is seen or heard. Some rotating bezels on wristwatches also work as Greenwich Mean Time indicators, compasses, pulse rate counters and slide rules.Full Answer >
A hologram watch is a watch that projects the time into the air rather than onto the face of the watch. There are several different designs of hologram watches, but one of the most popular designs looks like a bracelet that doesn't make a complete circle. On these wrist watches, the time is projected into the empty space between the two sides of the bracelet.Full Answer >
Turn the watch onto its side and place it on a flat surface. Position a micro screwdriver that matches the width of the watch's pin over the right pin of the link to be removed. Lift both sides of the link and gently push the pin down with the screwdriver.Full Answer >