To sharpen tweezers, hold a nail file between the blades, and rub the blades over the rough nail file surface. Before starting this task, wash the blades with warm water, and dry them. You need to take care not to cut your hands during the sharpening.Know More
Remove any hair residue and debris from the blades by rinsing the tweezers with warm water. If necessary, repeat the process until the blades are free of debris, and then blot the tweezers dry with a towel.
Grab the tweezers in your dominant hand, and have a nail file in the other hand, and bring the tips of the tweezers together against the nail file sandwiched between them. Rub the blades against the rough surface of the file by quickly pulling the file in one direction and then pushing it back. Repeat the back-and-forth motions until the tweezers are sharp, taking caution not to cut your fingers with the blades. For better results, change the direction of filing periodically.
Examine the blades to determine if they are sufficiently sharp. If they are not, continue sharpening them until you are satisfied with the results.
To adjust Wahl clipper blades, the user must detach the screws on either side of the blades, and then move the blades by small degrees until they are properly aligned. Over time, Wahl clippers might fall out of alignment, especially when used on thick or coarse hair. Adjusting the blades ensures a safe and accurate trim.Full Answer >
Hair clippers are sharpened with a honing stone. Any blade with rust that is eroding the metal, or that is broken, should be disposed of and not reused.Full Answer >
To sharpen ice auger blades, remove the blades from the auger, clamp them in a vise and use an auger-sharpening tool to sharpen the blades. Do not sharpen blades that are still attached to the auger as serious injury can occur.Full Answer >
To sharpen electric hedge trimmers, place the blades in a bench vice and file each blade for about two minutes with a metal file tool. It is important to file away from the body to avoid injury.Full Answer >