A control measure is any measure taken to eliminate or reduce the risk of injury or bodily harm by way of signage, physical restrictions, implemented policy or equipment repair. Control measures are commonly used in dangerous work environments, such as factories, to ensure safety.Know More
In order to effectively implement a control measure, the likelihood and potential severity of a risk must first be assessed. After assessment, relevant workers must be consulted to determine the most effective way of eliminating or reducing the risk. If available materials for control are not readily available, it should be considered whether or not they can be manufactured. A risk must be evaluated for its necessity also, since it is possible that the risk is a result of faulty equipment that will be eliminated once the equipment is repaired.
There are specific control measures for dangerous industries, such as hazardous chemicals. Some control measures in hazardous chemicals are safety masks, gloves and other protective equipment designed to shield the body. These control measures are unique to hazardous chemicals and must be implemented each day, whereas in other industries control measures are usually only implemented when a risk presents itself and only last while the risk is active.Learn more about Business Resources
An easy way to keep track of daily appointments is to write them on a calendar. A calendar application that can be used on a computer, smartphone or tablet makes remembering appointments even more convenient.Full Answer >
Food handler cards are available free of charge only in Maricopa County and only if an eligible non-profit organization applies for a fee waiver. Otherwise, as of April 2015, food handler cards in most counties in Arizona cost around $15. Not all Arizona counties offer or require food handler cards.Full Answer >
The correct way to use a tape measure is to read from large to small. Most measurements are whole-inch, half-inch or quarter-inch marks. These three marks take care of most measurements.Full Answer >
To know how to read a tape measure, someone must first know what the marks on the tape measure mean; the full lines that cover the entire width of the tape measure are equal to a full inch. The marks that cover approximately half of the tape measure's width indicate 1/2 of an inch, while the ones that cover a quarter of the width indicate 1/4 of an inch. Lines an eighth of the width are equivalent to 1/8 inch, and the shortest marks indicate 1/16 inch.Full Answer >