In the world of watches, Armitron is a leader and well-known producer of high quality watches and watch bands, however, at some point you may need to know how to replace the watch band on your Armitron watch.
First, you will need to find a suitable replacement watch band for your Armitron watch. To do this, you can shop around at your local department stores or visit the Armitron website to browse the various watch bands. After selecting a suitable watch band, you can begin the replacement process. First, you should use a small flathead screwdriver to pop off the watch pins that are holding the watchband in place near the face of the watch. After removing the watch pin, you will be able to completely remove one side of the watch band. Next, you will need to follow the previous steps to remove the other side of the watch band from the face of the watch.
Next, you will need to line up the new watch band with the face of the watch and put the pin back into place. You will probably need to use your screwdriver again to hold the watch pin in place while you line up the band with the face of the watch. After installing both sides of the new watch band, you should be good to go. Of course, you may need to make minor adjustments to the band itself in order to ensure that it fits your wrist. Also, you may want to talk with a watch professional or Armitron representative if you run into any trouble to avoid damaging the watch pin or damaging the face of your watch.