DODGE TRUCK 3500 FAQ

Frequently Asked Questions
1. Start the vehicle and turn the air conditioning system on. Operate the interior fan to make sure that the fan is functioning properly. Operate the control panel to make sure tha...
1. Open the fuse panel cover on your Dodge 3500: turn the knob on the fuse panel cover counterclockwise and pull down on the fuse panel cover. 2. Plug the OBD scan tool electrical ...
1. Park the Dodge 3500 on a flat surface and open the truck's hood. 2. Unplug the negative terminal from the battery of the 3500 with a socket wrench. 3. Pull on the dashboard cove...
under the hood on the drivers side. There is a fuse box. just lift the cover and locate the correct fuse.
The ECM is located on the drivers side of the engine block. It is mounted behind the fuel filter housing.
you need to remove the dashboard to reach there and you have to unlog it remove it chane the expantion valve and reciver drier make sure not to break any thing and nummber the part...
What transmissing is in your dodge truck depends on what model and year your truck is and if it is a standard or an automatic transmission. For more information go to your local de...
1. Park the Dodge 3500 truck on a level surface, close to the object you will be towing, and apply the parking brake. Turn off the engine of the truck. 2. Reach behind the rear bum...
1. Inspect the body to ensure all wiring and components are free on the top of the frame rail. Run your wires through the inner portion of the rail. Loose running wires could be cr...
1. Collect all tools and supplies needed to complete the oil change prior to starting. 2. Locate a safe place to complete the oil change. The location should be firm and level. Pav...
1. Use the heavy-duty jack to lift up the front of the vehicle and set it on the heavy-duty jack stands. Ensure that the vehicle is completely and solidly on the stands before work...
1. Buy the Flashpaq by Superchips that is correct for the model year and engine type of the truck. Flashpaq is the tuner offered by Superchips that upgrades the chip in the truck's...
1. Open the hood by pulling the release lever located inside the cab. 2. Locate the shock towers on each side of the vehicle. They are located inside the engine compartment on each...
1. Raise the front of the vehicle, using an automotive jack, and support with jack stands placed underneath the front frame. 2. Raise the rear of the vehicle with an automotive jac...
Power steering hoses are made to withstand very high hydraulic pressures. They are assembled with equipment made to do that which is impractical for a home-owner or even most shops...
According on what type of Dodge Truck you have, horsepower varies from auto to auto. But an average Dodge truck have about 500 hp. but after time that figure will decrease. Contact...
1. Loosen but do not remove the lug nuts, using the tire iron. Place the floor jack under the frame at the support point. Raise the Dodge Ram 3500 off the ground, using the jack. R...
1. Pop up the hood of your truck and hold it open with the rod. Locate the battery. On the batter is the negative battery cable clamp with a nut on it. Loosen the nut with an end w...
1. Turn off the Ram's engine and shift the transmission into park or first gear (manual transmission). Engage the emergency brake and pull the hood release lever. 2. Open the hood ...
All versions of the 2001 Dodge Ram 3500 came with a standard 5.9-liter V-8 with 245 horsepower at 4,000 rpm and 345 foot-pounds of torque at 3,200 rpm, according to MSN Autos. The ...
1. Detach the ground (black) battery cable using a wrench. 2. Pull out the engine oil dipstick, move it aside and cover the dipstick tube with a clean shop towel. 3. Lift the front...
1. Open the hood and prop it up. 2. Remove the two bolts that hold the headlight assembly with a socket wrench. 3. Locate the plug on the inside of the front fender, behind the hea...
1. Open the truck's hood and use a socket wrench to manually remove the negative terminal cable from the truck's battery. Locate the clutch master cylinder at the rear right of the...
1. Plug an on-board diagnostic (OBD) scanner into the test port under the dash. The test port, also called an assembly line diagnostic link (ALDL), accesses the trouble codes store...
About -  Privacy -   -  Careers -  Ask Answers  © 2013 Ask.com