HP 318 FAQ

Frequently Asked Questions
The Dodge Charger had a mid-range engine for its time, with a two-barrel carburetor as standard equipment. Later model years introduced the Slant Six in-line six-cylinder engine. T...
All depends on the year it was made, the car it was put in and it's modifications. Although from 81-87 in the ram, it had 140hp, and 230hp from 1992 to the time it was retired. And...
put on k&n air filter kit. get a chip. get decent exhaust like a cherry bomb. then if you really want a some power and you have the money either turbo charge it or supper charg...
With a few+ modifications, a 318 can be made into a HEMI, yeah that's right. But it will cost money and need complex parts and tuneing in order to do that. But to give a little boo...
BMW 318i car has 138 horsepower! Is that the 318 you were thinking of? ChaCha!
You've given no information to speak of other than the carb which is about 200 CFM more than you need unless the carb has been optimized for fuel flow. It's apparent you have throw...
The John Deer 318 Garden Tracotr has a 18 Horsepower Twin-Cylinder Onan Engine. Enjoy the weekend!
What Chassis code? It kind of matters, as the E30 mods aren't compatible with the E36... Sorry, I could list all the mods available for both, but that would take awhile. Check out ...
More horsepower means "burn more." You can do this in several straight-forward ways. Spin the motor faster. Force more fuel/air mixture into the motor. Get a larger motor. There is...
The oil capacity for an old Dodge with 318 horsepower is about 4 quarts. Have a good one!
You can build a naturally aspirated 318 to almost 400 horsepower but 450 is a stretch unless you're not going to run it on the street. You can either supercharge or turbocharge it ...
With that camera, you are looking for a compact flash card. You can get that format nearly anywhere that sells memory cards, but they are starting to be harder to get in the smalle...
you wont get a whole lot of horse power from it ,because of the bore it has and the stroke,you can add some to it though,a good set of headers will help it and so will a chip for t...
the 360 has a bigger bore and also has lot more room to bore it out if needed,i built a real good 318 engine to go in my truck but a 318 has its limits on power,the 360 can be easi...
A whole lot! Keep in mind, not only are you filling the transmission, but you are also filling the overdrive unit on the back of the tranny. I have a 97 ram 4x4 and I took the tran...
go with the 360 heads from a magnum engine they will give you a lot of boost on horse power,and you can still stay with the fuel system you have without having to change anything o...
You want to increase your horsepower by 50%, to do so means a rebuild with higher compression ratio, better flowing heads, headers, true dual exhaust at least 2 1/2 inches in diame...
I have a 1972 Dodge Coronet Custom with a 318, and was looking for ways to get a little more performance without spending much money. I was under the assumption that my engine made...
About -  Privacy -   -  Careers -  Ask Answers  © 2013 Ask.com