NISSAN SX FAQ

1. Add custom headlights. A variety of aftermarket headlights are available for the 200SX. Some are more recessed than the factory installed headlights and some protrude more. Beca...
1. Select a spot to mount the tachometer. Many people will mount them to the dash or the steering column, but chose a spot that is easy to see from the driver's seat. 2. Calibrate ...
1. Detach the black, ground cable from the battery using a back up wrench to hold the bolt head and a wrench to turn the retaining nut loose. 2. Jack up the front of your Nissan 24...
1. Trace the top radiator hose from the radiator to the location on the intake manifold where it is connected. Remove the clamp that holds the hose to the thermostat housing by pry...
1. Drive in a reasonable manner, avoiding aggressive driving tactics, such as speeding and rapid acceleration and braking. 2. Maintain the speed limit as gas mileage drops quickly ...
1. Pop the hood of your Nissan 240SX and locate the battery on the driver's side front of the car. Disconnect the battery cables with the socket wrench. 2. Unplug all of the wires ...
1. Park the car, turn off its ignition and open and secure the hood. Locate the tensioner pulley, which is the lowest pulley in the pulley system. It has a square hole for a 3/8-in...
1. Trace the top radiator hose from the radiator to the location on the intake manifold where it is connected. Remove the clamp that holds the hose to the thermostat housing by pry...
1. Disconnect the battery with a ratchet to prevent electrocution when removing the alternator. 2. Use the ratchet to remove the two bolts near the top of the radiator that hold th...
1. Park the Nissan in an area that will allow you to work on both sides of the vehicle. Apply the emergency (or parking) brake and place tire blocks behind the tires opposite the e...
1. Upgrade your S13 or S14 240SX's wheels and tires for something more aggressive. This is especially important if your car is a first-generation 240SX, as the stock wheels are par...
1. Pop the hood of your Nissan 240SX and locate the battery on the driver's side front of the car. Disconnect the battery cables with the socket wrench. 2. Unplug all of the wires ...
1. Park your Nissan 200SX in a flat, level area such as a garage, where you can keep your work area secure. Set the parking brake and allow the engine to cool. Release the catch fo...
1. Put the wheel chocks around the front wheels on the 240SX and lift the rear of the car using the jack. Put jack stands under the chassis. Take off the rear wheels with the tire ...
1. Loosen and remove the negative terminal of the car battery, with an adjustable wrench. this is always recommended when working with car electronincs. 2. Pry the plastic cover be...
1. Pop the hood on your Nissan 240SX. Loosen and remove its negative battery cable with your wrench set. 2. Engage your Nissan's emergency brake and jack up the front driver's side...
Head gaskets are essential to the proper functioning of your car. The Nissan 240SX, just like any other car on the road, is equipped with a head gasket that helps seal the connecti...
You can buy a Nissan 240sx from any of the used car dealers that carry them. You can also find them at swap and auction sites like Ebay and Craigslist. You can find more informatio...
Installing a thermostat onto a 1996 Nissan 200SX is necessary if the engine has been overheating or not producing enough heat to warm up the inside of the 200SX. Several reasons ca...
Installing an Autometer tachometer in your Nissan 240SX is a great option for a car that did not come with a factory tachometer. Autometer has a complete line of tachometers and ma...
Nissan 240sx Horsepower It depends on what year and what engine the Nissan has, usually 1989-1990 have the ka24e which is 140 hp. While the 91-98 have the ka24de engine which has 1...
The Nissan 240SX was a car introduced to the North American market by Nissan in 1989. It repl...
The Nissan 240SX was a car introduced to the North American market by Nissan in 1989. It repla...
The Nissan 200sx is a midsize sedan. ...MORE...
1. Plug the code scanner lead into the OBD (on board diagnostics) port located on the driver's side under the instrument panel just to the left of the steering column. Turn the ign...
1. Ensure the car is parked on a flat and level surface. Chock the back wheels. 2. Loosen the lug nuts with a tire tool but do not remove them. This will make removing the wheels e...
1. Disconnect the negative terminal on the battery and let the car sit for 15 to 30 minutes to disable the airbag. Remove the plastic cover on the left side of the steering wheel. ...
1. Loosen the lug nuts on both rear wheels. Ensure the parking brake is released. 2. Raise the vehicle, using the automotive jack, and support both sides with a jack stand. Remove ...
1. Park your Nissan on a flat surface with plenty of light to work by. Turn off the engine. 2. Slide under the front bumper and locate the access panel next to the fog light with t...
About -  Privacy -   -  Careers -  Ask Answers  © 2013 Ask.com