SONICWALL 2040 FAQ

how to configure a sonicwall pro2040?

1. Connect the power cord of the SonicWALL PRO 2040 in a wall AC outlet, and then turn on the power switch located on the back of the appliance. 2. Connect one end of an Ethernet c...

http://www.ehow.com/how_6447897_configure-sonicwal...

how to reset a sonicwall pro 2040?

1. Connect a computer to the Sonicwall Pro 2040 via a LAN port. Set up your computer to use IP address 192.168.168.20. 2. Insert the paper clip into the small reset hole on the bac...

http://www.ehow.com/how_7171982_reset-sonicwall-pr...

how do i add subnets in sonicwall 2040?

1. Type "192.168.168.168" into your Web browser's address bar, and press "Enter.". 2. Log in to the SonicWALL 2040 with the configured user name and password. 3. Click the "Network...

http://www.ehow.com/how_7612282_do-add-subnets-son...

how to set up an ftp through sonicwall pro 2040?

1. Log in to your SonicWall Pro 2040 administration panel. The address for the panel will be on a sticker attached to the device itself. 2. Click "Management," then "Firewall" and ...

http://www.ehow.com/how_8062061_set-through-sonicw...

How to enable ping to external interfaces of Sonicwall 2040

This can be done in two ways; you create a policy from WAN to LAN and forward ICMP traffic to : 1. an internal machine; in this case the machine would respond to ping traffic, so i...

http://www.experts-exchange.com/Hardware/Networkin...

How to Block IP on SonicWall 2040

Hmmm, what I would chase down now is to see if perhaps an internal host is contacting that IP. You could create a reciprical rules denying LAN > WAN for that IP address. I did a re...

http://www.experts-exchange.com/Hardware/Networkin...

How to block port scanning in Sonicwall Pro 2040

Firewall > Advanced > Enable Stealth Mode

http://www.experts-exchange.com/Hardware/Networkin...

How do I block a subdomain on a SonicWall 2040?

I tested the solution here, http:#a32847640, and it works perfectly. Of course, any site that has pacman or pac-man will be blocked. i know what you mean. i haven't tried that on ...

http://www.experts-exchange.com/OS/Microsoft_Opera...

How to block ports on a SonicWall PRO 2040 Standard

Have to restarted the router? Also block http://aimexpress.aim.com <--- The website for using AIM Yep it jumps ports... There are also some good suggestions about implementing a...

http://www.experts-exchange.com/Hardware/Misc/Q_21...

How do I reset it to factory settings? reset Sonicwall Pro 2040

2 seconds, I would assume you are right and it is not updating. Shouldn't take long but would be more like 40 to 180 seconds. Sorry no other suggestions at this point. Sounds like ...

http://www.experts-exchange.com/Hardware/Networkin...

how to allow vpn through sonicwall 2040 to isa 2006

There are a lot of things you need to check. Lets start here: Did you create a site-to-site VPN policy on the sonicwall? What method are you using to authenticate - Pre-shared key...

http://www.experts-exchange.com/Microsoft/Windows_...

How do I edit the routing tapble for a sonicwall pro 2040?

click on Network on the left-hand menu pane, then click on Routing. You can then add static routes by clicking the Add button.

http://www.experts-exchange.com/Q_23887932.html

How do you add custom options for DHCP in the sonicwall pro 2040?

Hopefully you already saw this http://www.sonicwall.com/us/support/230_2749.html. From what I can see, the TZ-170 does not allow configuration of scope options from the GUI. That ...

http://www.experts-exchange.com/Q_24307824.htm

How to setup Sonicwall 2040 for 2 non-contiguous public address ranges

Login into the IP Address of the sonicwall & enter your user\id info, then browse through the left-hand sidebar until you find the dns servers 1 - 3 area ( most isps only provide t...

http://www.experts-exchange.com/Security/Software_...

How do i configure my sonicwall PRO 2040 Standard to work with VNC Remote?

Take a look at this PDF, what your looking for is on Page 2: http://www.sonicwall.com/downloads/Configuring_SonicWALL__Port_Forwarding.pdf

http://www.experts-exchange.com/Developer/Protocol...

What is the best way to set everthing up? Setup a DMZ Zone on a Sonicwall Pro 2040

First, I assume you have an un-used interface on the box. X2? Go into Interfaces and designate X2 as "DMZ". Now give X2 a private Ip range not currently in use, e.g. 172.30.0.0/24 ...

http://www.experts-exchange.com/Developer/Dev_Tool...

how can we still block the https equivalent? sonicwall 2040 content filtering https domains

The CFS tab allows you to enable IP-based HTTPS Content Filtering; select SonicWALL CFS from the Content Filter Type drop-down on Security Services -> Content Filter page, then cli...

http://www.experts-exchange.com/Q_24644918.htm

How to enable access to SQL Server on Sonicwall Pro 2040 from NetExtender Client

you will need to configure the Firewall rules for this. Firewall tab click on the "Access Rules" menu option. When the list of access rules is displayed click the "add" button on...

http://www.experts-exchange.com/Networking/Network...

How do I set NAT up using SonicWall 2040 to GVC

If I'm reading this right and you have the same internal IP schema as your vendor, ie you both use 192.168.0.0/24 then there is no way for the routing to take place between the net...

http://www.experts-exchange.com/Networking/Misc/Q_...

What should I check from here? Sonicwall Pro 2040 Global VPN works but no Internet

Under "Client Connections to have the following unchecked? -Set Default Route as this Gateway -Require Global Security Client for this Connection What version of the client are you...

http://www.experts-exchange.com/Software/System_Ut...

What is wrong with this setup? Sonicwall PRO 2040 intervlan routing for Netgear GSM7248

Both VLANs are tagged? The Netgear device is supporting BOTH tags on the outside connection? Is the Netgear passing the tags across or stripping them? If passing, the Sonicwall is ...

http://www.experts-exchange.com/Q_24288115.htm

How can I add a Guest WiFi account for Sonicwall 2040 pro

I have set up my wifi for my business with wpa2 encryption as a virtual access point. I also set up a guest wifi account as open (for now), in the "virtual access points" option u...

https://www.experts-exchange.com/Hardware/Misc/Q_2...

How can i reneablke this if I can not get into the firewall? Sonicwall pro 2040 web management problem

Well, get the console cable and connect it to the console port on the sonicwall and the serial port on your machine. Open Hyper terminal and configure it to these specs 115,200 bau...

http://www.experts-exchange.com/Programming/Progra...

How do I configure Exchange behind the 2040 Sonicwall firewall enhanced OS?

I got the answer. http://www.sonicwall.com/us/support/2134_3121.html

http://www.experts-exchange.com/Security/Software_...

How do I vpn into a Sonicwall PRO 2040 from a Cisco E3000?

This appliance doesn't have site to site vpn capabilities. The VPN passthrough is to allow an appliance behind the e3000 to establish VPN connections egress. You best option is to...

http://www.experts-exchange.com/Software/System_Ut...

How would I set up the rules for that? block ip address with sonicwall pro 2040 enhanced

The zone depends on the place where the address resides, continuing from my last post, if we want to create address on step 6, we would select WAN [there is a correction, I should ...

http://www.experts-exchange.com/Q_24541006.htm

What is the best way to set this up work work? Setup DMZ with Sonicwall Pro 2040

Of course. Check your DMZ to WAN firewall rules. You can allow all traffic out, or, more secure, only allow minimum ports, like 80 (web) 53(dns) For ping to go out, you need to all...

http://www.experts-exchange.com/Q_24462426.htm

How does the 2040 SonicWall with content filtering & Anti Spyware compare to? SonicWall vs Cisco ASA 5510

This doesn't really address your question, as I have no experience with the content filtering and anti-spyware capability on the Sonicwall, but I wanted to submit that you are look...

http://www.experts-exchange.com/Q_22463959.htm

How do I forward port 5500 to my internal ip address on a Sonicwall Pro2040?

You will have to setup NAT in the firewall settings to forward to that port. Source(s): Past Experience

http://answers.yahoo.com/question/index?qid=200811...

How to use multiple WAN IP addresses that resolve to respective internal web servers with a two web servers Sonicwall Pro 2040 running OS standard.

Did you add 1-1 NAT before adding the policy rule; if yes, then under source you should have WAN interface selected or leave on to default * [source would be used only if you are e...

http://www.experts-exchange.com/Hardware/Networkin...