Q:

How do water clocks work?

A:

A water clock uses flowing water to measure time according to the National Watch and Clock Museum. Water clocks are classified as either "outflow" or "inflow" water clocks based on the way liquid moves in relationship to the primary vessel.

Time is measured with an outflow water clock by filling a vessel with water and slowly draining it away at as even a rate possible. Markings inside the vessel are observed to gage how much time passes. According to FactMonster.com, this type of water clock is similar to the clepsydras used in ancient Greece around 325 B.C. Greek clepsydras were stone bowls with sloping sides that permitted water to drip at a nearly constant rate from a small hole near the bottom.

An inflow water clock works in the reverse manner as the outflow model. This type of water clock uses liquid to fill up a container rather than drain it away. As the water rises, time can be measured against hour and minute marks made inside the vessel. FactMonster.com reports that a type of inflow water clock is still used to this day in parts of North Africa. A metal bowl with a hole in the bottom is set within a larger body of water, and as the water seeps slowly into the bowl, it sinks within a set amount of time.

Because the rate of water flow is difficult to control accurately, both types of water clocks have a varying margin of error.


Is this answer helpful?

Similar Questions

  • Q:

    Who invented candle clocks?

    A:

    The inventor is not known, but the earliest documented use of a candle clock is from approximately 500 A.D. in China. A Chinese poem by You Jiangu describes a clock that uses six candles that are marked in increments of 20 minutes. Each candle takes four hours to burn.

    Full Answer >
    Filed Under:
  • Q:

    What are labor-saving devices?

    A:

    Labor-saving devices are inventions that reduce the time and effort needed to perform or complete a task. Farm equipment, home appliances and construction equipment are examples of mechanical inventions that save time and physical labor.

    Full Answer >
    Filed Under:
  • Q:

    Who invented porcelain?

    A:

    Porcelain was invented by the Chinese sometime during the Tang Dynasty, which lasted from 617 to 907 A.D. However, they had been making ceramics and proto-porcelain materials for as many as 1,000 years before this time.

    Full Answer >
    Filed Under:
  • Q:

    How has technology changed over time?

    A:

    Over time, technology has changed to allow people to communicate more quickly and efficiently; it has become the ultimate mode of convenience for people who wish to perform tasks that would have taken a long time in the past. Technology has gone from a means to make difficult tasks easier to a means for making easy tasks easier.

    Full Answer >
    Filed Under:

Explore