Making a cardboard racing car involves painting a box, taping it together, cutting out the doors and windows, attaching the tires and finishing the interior. The project takes roughly 20 minutes plus paint drying time and requires a large cardboard box, craft paint, paintbrushes, a box cutter, five black paper plates, four paper fasteners, two plastic cups, round stickers, clear packing tape, an awl, glue and a cushion.
Cover your work surface with plastic or newspaper, and lay the box flat on top of it. Paint the entire outside of the box all one color, with stripes or with custom designs. Allow the paint to dry completely.
Use clear tape to seal the top and bottom of the box.
Lightly trace a semicircle from the top of the box on either side. Use a box cutter to remove these semicircles, creating the doors.
Follow the seam of the box back, cutting three sides two-thirds of the way back and fully exposing the semicircles. Push the flap of cardboard up. Fold it in half, securing it with tape. Cut a rectangle from this flap, creating the windshield.
Place a sticker in the center of each plate. Use an awl to punch a hole in the center of each sticker. Line each tire up on the box, and use the awl to punch through the cardboard.
Insert a fastener through the hole, flattening the arms on the inside.
Apply glue to the bottom of each plastic cup. Press each against the front of the car until they stay in place.
Use the glue to fasten the remaining paper plate inside the car as the steering wheel. Insert the cushion, creating the driver's seat.
Make a tricorn hat out of paper by molding packing paper around a bowl for a cap and shaping the edges for the brim. This project takes under an hour. You need a mixing bowl, heavyweight packing paper, masking tape, glue dots and scissors.Full Answer >
Make scented paper by dipping it in a solution of color and scented shaving cream. The actual process takes only a few minutes, although you need to allow the paper to dry completely before using it. You need paper, shaving cream, a spatula, water, food coloring, a shallow pan, an iron and paper towels.Full Answer >
Heat transfer printing uses a heat press to transfer a design to objects such as clothing or textiles. Some examples are heat transfer vinyl, commonly used on athletic uniforms, and special effect heat transfers like glow-in-the-dark or reflective designs.Full Answer >
You can make a paper plane fly far by choosing a design that flies long distances without nosediving. The technique used for launching the plane into air also impacts how fast and far it can fly. You need a piece of paper to make the paper plane. Use decorative paper to make your plane unique.Full Answer >