To make your own knitting loom, you need a pen or pencil that can leave marks on ring material. You also need a ring, rubber and tape.Know More
For a ring, you can use a wooden circle, a packing tube or even a needlepoint hoop. Make sure that the ring material is durable because this is what can make your loom durable as well.
Use a measuring tape to measure the peg placement. The number of pegs can determine the size of your finished project. This is why if you need to knit a larger item, you have to use more pegs. With a pen or pencil, mark the place where you wish to place each peg.
Make sure that you secure the pegs to the ring. For this task, you need a hammer or duct tape. For a wooden ring, you can use the hammer. For cardboard or plastic materials, you need tape.
Before beginning your project, test the strength of your knitting loom. You can do this by knitting a small piece of material. Check if the pegs are staying in place.
To make bracelets on a Rainbow Loom, hook stretch bands on the pegs in various patterns. You can make a simple single chain bracelet in about 15 minutes.Full Answer >
Make an easy single chain loom band bracelet on a loom or with your fingers using only 25 stretch bands and a stretch band clip. The process takes less than 10 minutes.Full Answer >
To make a peg loom, gather a wooden dowel, a piece of timber, a drill and drill bits. Cut the wood to the size you want. Drill holes into the piece of wood, and stick the wood pegs into them.Full Answer >
Made from wood blocks and nails, homemade knitting boards help keep stitches straight and even. Before attaching nails, determine the weave type. Place nails closer together for a tight weave or farther apart for a loose weave. Weave type depends on the knitting project.Full Answer >