To reset a slot machine, open the service panel, locate the jackpot compartment, insert the jackpot key, and turn it slightly to the right. This 5-minute procedure requires the service panel key, the jackpot compartment key and a flashlight.Know More
Insert the slot machine service panel key into the lock on the side of the machine. Turn the key until the panel pops open.
Locate the jackpot compartment, using a flashlight if necessary. If you do not already have the jackpot compartment key, examine the sides of the cash box. Most slot machine models have a plastic jackpot key sleeve on the side of the cash box.
Insert the key into the jackpot compartment. Slowly turn it one-quarter turn to the right. Do not turn the key further or attempt to turn it multiple times, because this causes most slot machines to enter calibration mode and renders them temporarily unplayable..
Return the key to its original position, take it out of the lock, and return it to the sleeve on the side of the cash box. Close the service panel, and verify that the machine is reset.
Utilizing the *67 service to block a phone number does not cost money. Phone service providers are required by the Federal Communications Commission (FCC) to provide customers with free methods to block and unblock their numbers on a case-by-case basis.Full Answer >
Using a multimeter, insert one of the probes from the multimeter into one of the parallel slots in the 240-volt outlet and insert the other probe into the other parallel slot to test if the outlet is indeed carrying 240 volts. If the voltage does not add up to 240 volts, check the slots individually to see which one is carrying less voltage.Full Answer >
To install a video card, open the computer case, remove the old video card, insert the new one into an open slot, and secure it with screws or hooks. Close the computer case, and restart the computer to install the drivers.Full Answer >
To hang a panel of stained glass, drill stud holes in the panel frame, insert wood screws and washers, fasten the panel to the wall, and level it. The required supplies are: a stud finder, a drill, wood screws, washers, a screwdriver and shims. You also need assistants.Full Answer >