Repairing a broken guitar string is a matter of removing the broken string carefully and replacing it with a new one. Guitar strings may break for a number of reasons, including poor string playing, rough edges inside the tuning posts, sharp frets and rusted frets.Know More
There are a number of general steps to follow when replacing guitar strings.
Step 1: Remove the strings
While this process may seem fairly simple, it must be done carefully, especially when dealing with older guitars. If multiple strings are being repaired, then removing all the strings at once may cause the neck of the guitar to warp or even snap. However, sturdier guitars should not have this problem.
Step 2: Insert the new string
First, secure the new string into the bridge of the guitar. This is a different process for different guitars, but copy the method used to fasten the other strings on the guitar. Then, loosen and align the tuning peg with the nut slot, and draw the string through the hole. When there's about 5 centimeters between the string and the fret board, there will be room for the tuning peg to be wound around three times.
Step 3: Fasten the string
Bend the end of the string so that it can be folded under itself. If the string is sharply pulled upwards, it will stay in place while the tuner is turned in three complete circles until tight. Cut the excessive string.Learn more about Musical Instruments
Some guitars have the production date etched or stamped on the back of the guitar while others are marked with a serial number that indicates the production year. The serial number can be looked up on the guitar manufacturer's website to find out the year it was made.Full Answer >
The "ease" of learning to play the guitar is subjective, differing in perspective among individuals. However, there are basic techniques most guitarists should learn to help things go smoothly. Much of the early process involves learning the parts of the guitar, memorizing chord shapes and practicing to build muscle memory.Full Answer >
Tune a four-string banjo by deciding what kind of tuning you want to use and then tune each string separately. This takes a couple of minutes. You need a four-string banjo and an electric tuner or another instrument to which you can tune the banjo.Full Answer >
Technically, the piano is a percussion instrument, and it generates noise when the keys are depressed because each key is connected to a small hammer that strikes a string that is located inside the instrument. Pianos with broken keys, hammers or strings will not generate sound correctly and may not even generate any sound at all other than the sound of the key being struck. Piano players use their fingers and hands to depress the keys, which then triggers the string striking that generates musical notes that coordinate to the specific key being pressed.Full Answer >