To build brick steps, measure the area, dig the steps, fill the footings and lay the steps. The rise of the steps should be consistent and fall between 4 and 8 inches tall.
Know MoreIn order to build brick steps in a yard:
First measure the height of the slope and then calculate how many steps are required for the space. The height is determined by placing one post at the bottom of the slope and one at the top. Run a level string from the top of the slope touching the ground to the other post. Measure up from the ground to determine the height. Then divide this number by one riser, which should be between 4 and 8 inches.
Create a base for the bricks by digging out the steps and compacting the surrounding dirt. Mark the sides with pegs and string.
Dig a footing that is 6 inches deep and wide enough to accommodate two bricks. Add a 4-inch layer of crushed stone and fill the remaining area with concrete.
Lay the layers of bricks in the footings, ensuring they are level. Then use crushed stone to fill the risers to the height of the bricks. Add a 1/2-inch of mortar on top of the stone and lay the steps on the mortar. Fill all of the gaps with mortar to finish the steps.
To drill into brick, purchase a masonry bit for an electric drill. While wearing eye protection, hold the drill bit perpendicular to the brick, and drill as deep as necessary.
Full Answer >Install brick molding by cutting it to size, miter cutting the corners and using adhesive and nails to attach it. You need adhesive, caulk, nails, a hammer, paint, a miter saw and brick molding. You can complete the installation of brick molding in one day.
Full Answer >To build a woodshed, build a frame from pressure-treated wood on top of a cinderblock foundation. Before building, make sure the area is clear and the ground is flat and level.
Full Answer >To build trusses, determine the pitch, or the slope, of the roof, and use a rafter square to measure the angles needed to construct the trusses with the correct slope. Make the mitered cut on each rafter, and secure them to the ceiling joist.
Full Answer >