Q:

How do you build a gas fire pit?

A:

Quick Answer

To build a fire pit, build a base from brick, concrete or cinder blocks, and insert a pre-made fire bowl with a propane gas kit. For a more permanent and cost-effective option, have a professional run a natural gas line from your house to the location of the fire pit.

Know More

Full Answer

  1. Find a location

    A suitable location for a fire pit is away from any flammable materials or ones than can melt, such as vinyl siding. Check local regulations for having an open flame on residential property.

  2. Build a base

    Construct the base by stacking bricks, cinder blocks or concrete. Make the base just large enough to hold and support a pre-made fire bowl. If you use a propane tank to fuel the fire pit, you can also make the base portable, and move it around your property as desired.

  3. Connect the gas

    If you are using a natural gas line, install the gas burners, and connect them with the gas line coming from the house. Protect the base of the burners, and cover them with stiff wire mesh. If you are using propane to fuel the fire pit, place the tank inside of the base, followed by the bowl.

  4. Finish the fire pit

    Add lava rocks or fire glass on top the burners or inside the bowl, and turn on the gas.

Learn more about Outdoor

Related Questions

  • Q:

    How do you build a brick BBQ pit?

    A:

    To build a brick barbecue pit, measure the area, lay the concrete, dry lay the first layer of bricks, mix the mortar, lay the first, second and third layers with mortar, and finish it off with a jointer. This process takes between three and four days because of the necessary drying times.

    Full Answer >
    Filed Under:
  • Q:

    How do you build a fire pit?

    A:

    To build a fire pit, dig a slight depression in the earth, and surround it with a ring of stones. Make sure the pit is located a safe distance from any shrubs, bushes, tall grass or other vegetation that may pose a fire hazard.

    Full Answer >
    Filed Under:
  • Q:

    How do you build a backyard fire pit?

    A:

    Build a backyard fire pit using concrete blocks or bricks, rebar stake and shovel. Mark a circle in the area with the stake, string and shovel, and dig a small area for the wood. Complete the pit with rocks, bricks or blocks to encase the fire.

    Full Answer >
    Filed Under:
  • Q:

    How do you build a stone fire pit?

    A:

    Build a stone fire pit by constructing a short stone wall lined with fire brick, building a cement footing and using mortar to hold the stones in place. The project should take about three hours to complete.

    Full Answer >
    Filed Under:

Explore