A paste of baking soda and water and some elbow grease is one way to remove scorch marks from a ceramic stove top. All-natural solutions or special cleaners designed for ceramic surfaces are preferred, and the milder they are, the better.
Baking soda is a common staple in most kitchens and makes a great nonabrasive paste when mixed with water that is gentle enough for ceramic but also strong enough to tackle tough scorch marks. Mix baking soda and water into a thick, grainy paste and work into the burn mark with a cloth using small circular motions. It may take several passes for the scorch to start to fade.
Another household scrubber that is also nonabrasive but slightly more alkaline than baking soda is cream of tartar. It is mixed with water to form a paste and applied the same way as the baking soda, but it tends to dissolve more readily in water, so more cream of tartar will be needed to get the right consistency. Because these methods rely more on elbow grease than chemicals, the burn mark may need to be removed over the course of several sessions. If the burn mark is especially bad, a chemical cleaner specifically designed for use on ceramic may be needed.Learn More
Although a pellet stove does not need a traditional chimney, it does require an exhaust pipe to the exterior of the building. This keeps potentially toxic gases from building up inside.Full Answer >
An F10 error on a Kenmore stove indicates that the temperature conditions in the oven are incorrect. Using a flashlight and a digital multimeter, you can find out what the problem is in less than an hour.Full Answer >
To clean stove burner grates, soak them in warm, soapy water, and scrub with a non-metal soap pad, rinse the grates well, and seal each grate in a plastic bag with a 1/2 cup of household ammonia. Wait overnight, and rinse the grates again, then polish the grates with a soft cloth.Full Answer >
Remove caked-on grease and other debris from gas stone grates quickly and efficiently using grease-fighting dish soap, non-abrasive cleanser, a nylon scrubbing pad and plenty of hot water. Cleaning can be undertaken without damaging the enamel covering on the grates.Full Answer >