A: ### Quick Answer

**To determine the number of floor tiles required to cover a given space, multiply the length by the width of the space in feet to calculate the total square footage or area, then divide that number by the size of the tile.** This is easiest with 12-inch tiles, but it is possible for any size of tile.

Factor waste and mistakes into the number of tiles need to floor a particular space. Some tiles will be damaged or otherwise rendered unusable, so consider a 5 percent "cushion" to ensure accuracy.

- Determine the area of the space
- Divide the area by the size of the tile

Calculate the area of a room or space by multiplying the length in feet by the width in feet. If the answer is 200, for example, then the space is 200 square feet.

For 12-inch tiles, the total area is also the number of floor tiles required to cover the space. To calculate the appropriate number for other sizes of floor tiles, determine the size of that tile in square feet. For example, four 6-inch tiles make up one 12-inch tile. Therefore, divide the square footage by 0.25 to determine how many tiles will be needed.

Sources:

- Q:
## How do you convert feet into square yards?

A:Convert square feet into yards by multiplying the length of a space by the width of the space to calculate the area of the space. Divide the sum by 9 to arrive at the square yardage of the space.

Full Answer >Filed Under: - Q:
## How do you calculate the area of a carpet?

A:To find the surface area of any space, multiply the length of that space by its width. To find the area of a room for carpeting, you need a measuring tape and a calculator.

Full Answer >Filed Under: - Q:
## How do you calculate occupancy loads?

A:To calculate the occupancy load of a room, first determine the area of the space by multiplying the length by the width. Then, divide the area by the occupant load factor, which is based on how the space will be used, according to hardware consultant Lori Greene for Allegion.

Full Answer >Filed Under: - Q:
## How do you calculate 64 linear feet into square feet?

A:To convert 64 linear feet to square feet, you must determine the object's width and then multiply by 64. To calculate linear feet, the object must be flat.

Full Answer >Filed Under: