Q:

How can I clean rust off my gas grill grates?

A:

Remove rust from gas grill grates using a baking soda solution, commercial rust remover or a stiff wire brush. Cleaning supplies include a bucket of soapy water, a sponge, rust remover, a plastic brush and a wire brush for use if the other methods do not work.

  1. Clean the grill grates with a plastic brush

    Place the gas grill grates in a bucket of soapy water, and scrub them with a plastic brush. Scrub at the worst rust build-up, and try to get as much of it off as possible. Switch to a sponge, and clean the entire grate with water.

  2. Apply a rust-removing solution

    Spray or soak the grates in a rust-removing solution. Start with the gentlest solutions first, and work up to more intensive ones if the initial cleaning fails to remove the rust. Baking soda solutions, vinegar and salt, vegetable oil and commercial rust removers are available options. After soaking the grates, scrub them with a plastic brush to remove rust.

  3. Use a wire brush or steel wool

    If using a rust remover fails to remove the rust, use steel wool or a wire brush to remove it. While effective, using wire or steel wool scratches the finish and makes it more likely that the rust will return.

Sources:

  1. charbroil.com

Is this answer helpful?

Similar Questions

  • Q:

    How do I clean a pilot light?

    A:

    To clean a pilot light, use a stiff wire brush, a metal file and an air compressor to clear away buildup. You also need water and gloves. You need to disconnect all sources of gas and electricity before cleaning.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove rust from pool water?

    A:

    Remove rust from your swimming pool by shocking the water and vacuuming the precipitated rust. The required supplies are a water testing kit, shock treatment packets, chelating chemicals and a pool vacuum. Although the time required varies with the size of the pool and the amount of rust it contains, most treatments take about a day.

    Full Answer >
    Filed Under:
  • Q:

    How do I clean onyx?

    A:

    Onyx is a glossy, porous material that requires special handling and gentle cleaning. Remove dirt, grime and grease from onyx without damaging it. To clean your onyx surfaces with this technique, you need soft cloths, a towel, mild dish soap, warm water and stone cleaner. It takes roughly 15 minutes to clean the stone and six hours for the sealant to harden.

    Full Answer >
    Filed Under:
  • Q:

    How do you clean pashmina?

    A:

    Keep your pashmina beautiful and unblemished by cleaning it properly. Washing this woolen wrap by hand is the best bet, and it takes only an hour or two depending on the soaking and drying time. You need water, soap, a drying rack, two towels and an iron.

    Full Answer >
    Filed Under:

Explore