A simple, homemade paste of vinegar, salt and flour, and a lot of elbow grease, can remove tarnish from brass. Any mild acid and abrasive will work, so lemon juice can be used instead of vinegar and cream of tartar or baking soda can be used instead of salt. There are also a number of commercial brass cleaners and polishes available.Know More
Brass items can be made of either solid brass or brass-plated steel. A magnet will stick to brass-plate but not solid brass.
Any removal of tarnish also removes some of the brass, so more care must be taken with brass-plated items. They should never be cleaned with a highly abrasive cleaner or scrubbed with an abrasive scrubber such as steel wool. Solid brass can withstand a more vigorous scrubbing and a more abrasive cleaner. Once the tarnish is removed from the brass, it can be polished with a commercial brass polish to preserve the patina.
Often, both solid brass and brass-plated items are lacquered to reduce the need for frequent polishing. Lacquered brass should only be cleaned with a mild detergent. Ammonia-based cleaners will harm the lacquer coating. After lacquered brass is cleaned, it should be wiped with lacquer thinner to remove all traces of cleaner. Seriously damaged lacquered brass can have the lacquer removed and reapplied.Learn more about Cleaning
Clean tarnished silver by placing a piece of aluminum foil in the bottom of a kitchen sink, filling the sink with warm water and adding 2 tablespoons of salt. Immerse the silver, let it soak for three minutes, and rinse clean.Full Answer >
The most effective way to clean tarnished stainless steel cutlery is to soak it in a solution of hot water and ammonia. This two-hour process requires a bucket, hot water, soft towels, a microfiber cloth, latex gloves and a disposable filter mask.Full Answer >
To polish brass, mix a paste of baking soda and distilled white vinegar. Rub the mixture onto the brass item with a soft cloth in a circular motion. Rinse the item well with warm water, and polish it to a shine with a clean, dry cloth.Full Answer >
Stop brass from tarnishing by applying multiple thin coats of clear lacquer to the brass on a periodic basis. The application of lacquer prevents exposure of the brass to air. Exposure to air oxidizes the copper and zinc in the brass, creating a green patina that some consider undesirable.Full Answer >