Box spring mattresses that are bulky and inflexible may not easily fit up a narrow staircase and can be temporarily folded in half by cutting two of the box spring's rails. With the box springs face down, remove the fabric covering and cut the left or right rail avoiding the center rail.Know More
To temporarily fold the box springs to fit up a narrow staircase or tight corner:
With the box springs face down, remove covering and cut to the left or to the right of the center crosspiece on both sides and center of the mattress. Box springs can fold to easily navigate small spaces. Secure folded ends to prevent the box springs from moving during relocation.
Screw 1x2 wood reinforcements along cuts and outer frame. Staple mattress covering back into place.
Place a 3/8-inch plywood board on the box spring, and set the mattress on top of the board to create a firm resting place. You need an electric saw, measuring tape, a marker, sandpaper and the mattress.Full Answer >
You do not need a slatted bed base if you have a box spring. When you purchase a mattress, you choose either a slatted base or a box spring as the method of support.Full Answer >
A standard crib mattress is 28 inches by 52 inches. At this size, many standard crib mattresses are able to change, along with the crib, into a bed for a slightly older child. These dimensions are in compliance with federal law regulations set by the United States Consumer Protection Safety Commission.Full Answer >
To build a speaker box, measure and cut the boards to fit around the speaker driver, make a hole in one of the boards to install the speaker driver, and attach a speaker cloth on the front panel. Assemble the box, drill a power cable hole, and close the box.Full Answer >