An unsoiled, damp cloth is sufficient for the basic cleaning of a tanning bed. For a more thorough cleaning, pH neutral no-rinse cleaners work best.Know More
To begin a basic cleaning of a tanning bed, make sure the bed is turned off, unplugged and properly cooled. Remove the tanning acrylics that cover the UV lamps within the bed. Remove the UV lamps from the fixtures, and any other movable parts within the bed. Take a damp cloth and wipe down each section thoroughly. Periodically stop to rinse any debris or dust from the cloth, and make sure each section of the bed receives an optimal cleaning. Open the ballast tray under the tanning bed, and clean out the dust to prevent a fire hazard.
If a deep cleaning is required, use a no-rinse disinfectant. Otherwise, any residue left on the tanning bed can heat up and pose a risk of toxicity for those using the bed. Leftover residue can also permanently damage the tanning acrylics or the bed itself.
Check the bed’s cooling fans for accretions of dust and dirt. The cooling fans are located at the bottom of the bed. Some models contain separate fans in the canopy of the bed.Learn more about Cleaning Products
Using sunscreen does not offer complete protection against the amount of UVA radiation of a tanning bed. The amount of UVA radiation produced by sunbeds can be 10 to 15 times the amount that people are exposed to when they are out in the midday sun.Full Answer >
To get the best results from a tanning bed, remember that moderation is key. Start with shorter sessions in lower-intensity tanning beds. Take caution that skin does not become red, overly dry or itchy between sessions. These are signs of excessive tanning.Full Answer >
According to About.com, the use of sunscreen in tanning beds contradicts the whole point of using a tanning bed because it blocks the artificial UV rays that are emitted to create a tan. The artificial UV rays produced by tanning beds are often stronger than those produced by the sun.Full Answer >
To get a dark tan using a tanning bed, tan on a regular schedule and use skin products specifically made for tanning. You should not use baby oil, which damages tanning beds and puts you at risk for burning.Full Answer >