Brick can be cleaned by mixing muriatic acid and water, brushing or spraying the mixture on the bricks and then rinsing it off. Avoid any skin contact with the mixture.Know More
Muriatic acid is a very strong acid that is used in masonry work. Homeowners must follow all safety precautions when using muriatic acid. According to the experts at Natural Handyman, muriatic acid can damage anything, including skin.
It is often easier to spray the muriatic acid and water solution onto brick walls than it is to try to use a scrub brush. Purchase a cheap plastic sprayer and put the water in first, in the amount instructed on the acid's container. . Never put the acid in first; it will eat the plastic immediately.
Make sure to wear rubber gloves and if the wind is blowing, full-body protection. Spray the brick wall with water before applying the acid solution. Let the acid soak for about 10 minutes and, if necessary, use a stiff brush on difficult areas. Rinse with a solution of 1-cup ammonia to 1-gallon water to neutralize the acid. The brick should now be clean until the next annual cleaning.Learn more about Cleaning
To clean brick, coat it with ammonia, pumice, water and Fels Naptha soap, scrub it, and rinse it. This two-hour process requires boiling water, Fels Naptha soap, a knife, ammonia, pumice, a measuring cup, rubber gloves, a paintbrush, a scrub brush, a wooden spoon, dish soap, a bucket and rags.Full Answer >
Sandstone can be cleaned by manually scrubbing it with a brush and cleaning agent, or it can be washed with a pressure washer. The type of cleaner that should be used depends on the composition of the sandstone.Full Answer >
Cleaning lead is a simple process that takes a variant amount of time depending on the amount of lead that needs to be cleaned up. In order to clean lead, you will need household detergent, a bucket, gloves, paper towels and a sealable plastic bag for safe storage of the paint chips.Full Answer >
Lacquer furniture should be cleaned with a slightly damp cloth, followed immediately by wiping it down with a dry cloth. Once all dirt is removed, the furniture can be waxed with a liquid wax designed specifically for lacquer.Full Answer >