To clean fiberglass shower stalls, treat them with undiluted vinegar or nonabrasive cleaners, rub a baking soda paste into problem areas, and scrub down the stalls. You need undiluted vinegar or nonabrasive cleaners, a spray bottle, a container, baking soda, water, a rag and a towel.Know More
Pour undiluted vinegar in an empty spray bottle.
Thoroughly spray the fiberglass stalls with the vinegar solution. You can use other cleaners as long as they are nonabrasive. Allow the vinegar or cleaners to soak into the walls for several minutes. This allows the solutions to dislodge any soap scum or water spots.
Use a clean cloth to wipe down the stalls and remove any remaining vinegar.
Make a baking soda paste to remove any stubborn water spots or problem areas. In a container, add 1 part water and 2 parts baking soda. Mix the two together until a paste forms.
Dip a cloth into the paste, and rub it over any remaining water spots.
Rinse the walls with warm water until all the paste is removed.
Wipe the stalls dry with a clean towel.
To clean a marble shower, wipe it with a wet chamois cloth, apply soap scum remover, treat stubborn stains with steel wool, apply mold killer, and dry the marble. This 45-minute process requires distilled water, two chamois, soap scum remover, a toothbrush, steel wool and mold killer.Full Answer >
Clean shower doors by scrubbing them with vinegar, and then spray bleach on any moldy areas. This procedure usually takes about 15 minutes. The required supplies are rubber cleaning gloves, white vinegar, a disposable cone mask, a large sponge, bleach, an old toothbrush, a bucket and an empty spray bottle.Full Answer >
You can clean a shower head with vinegar by filling a plastic sandwich bag with white distilled vinegar and tying it over the shower head. Leave the vinegar on the shower head for a few hours to remove residue.Full Answer >
Clean a tile shower using a variety of easy-to-mix solutions that are strong enough to match the level of dirt found. For light cleaning, use mild soap and water. A mixture of vinegar and water is useful for light water stains, while a bleach-and-water solution might be necessary to remove heavy stains.Full Answer >