Remove caked-on grease and other debris from gas stone grates quickly and efficiently using grease-fighting dish soap, non-abrasive cleanser, a nylon scrubbing pad and plenty of hot water. Cleaning can be undertaken without damaging the enamel covering on the grates.Know More
Place cooled gas oven grates into an empty sink without them touching one another. Boil some water using a pot or kettle, and then pour the boiling water over the grates to cut through the surface layer of grease and wash some of it away.
Fill the sink with hot water, and add enough grease-cutting soap to create suds. Allow the grates to soak for about 15 minutes to allow the soap to cut through the remaining grease. Drain the water from the sink.
Place a non-abrasive cleanser onto a nylon scrubbing pad. Scrub at the grates with the powder to remove any remaining grease or food particles. Rinse the grates with warm water, and apply the powder to any section where debris remains. Allow the powder to sit for five minutes, scrub it off, and rinse the grates again. Dry the grates off completely with a dry paper towel before placing them back on the stove.
Stove top grates should be replaced when there is an accumulation of rust that can't be removed, the structural integrity of the grate is compromised by cracks and other wear, or the grate has become warped. Cast iron stove top grates are designed to last for many years between replacements.Full Answer >
The best products for cleaning gas stove burners depend on the frequency of cleaning the burner pans and typically include powder scouring cleaners, oven cleaners, scouring pads or a mixture of ammonia and hot water. Dish soap and baking soda also come in handy when cleaning burners.Full Answer >
When compared in terms of energy efficiency, a gas stove is much more efficient than an equivalent electric stove. This results in a gas stove costing a user much less to run than an electric one.Full Answer >
Converting a stove from natural gas to propane involves changing internal parts to compensate for the differences in the operating pressure of the two gases. It requires installation of a conversion kit. If the kit is not available, owners should not attempt to convert the appliance.Full Answer >