To clean a grease trap, open the unit, and remove the contents by placing them into a garbage bag that contains oil dry. Dispose of the contents of the grease trap, and add the required enzymes or bacteria. A standard grease trap can be cleaned within a few hours.Know More
Locate the grease trap, and open it to begin removing the materials inside. Note the position of the gasket and other parts, as it is necessary to replace each part after cleaning.
Begin scooping out the solid grease inside the grease trap, and place the materials that are removed in a garbage bin that is triple-lined with heavy-duty garbage bags. Place a small amount of oil dry, available at most auto parts stores, in the bottom of the topmost garbage bag to absorb excess water and grease, and dispose of the materials according to local regulations. If required, add grease trap bacteria or enzymes to the unit after removing the solid particles of grease.
Ensure all the parts inside the grease trap are in proper working order to prevent releasing grease into local sewage systems. Replace any parts that appear damaged, and reassemble the unit. Do not use soap or other cleaning agents in the grease trap.
Use a mild cleaner, and work your way up to a stronger one to clean laminate kitchen cabinets. Be gentle, and avoid hard scrubbing to prevent unsightly surface scratches. You need nonabrasive cloths, water, cleaner, a bucket and a spray bottle.Full Answer >
Clean kitchen cabinets by emptying them, wiping the interiors with soapy water, rinsing and drying. Clean the exteriors by treating especially soiled spots with a cleaner that contains orange oil, wiping the exteriors down with soapy water, rinsing and drying.Full Answer >
To remove grease from wood cabinets, scrub with a solution of liquid detergent and warm water, then rinse the wood with water before applying a baking soda paste directly on the grease stains. Finally, scrub the stains, and rinse the cabinets with clean water.Full Answer >
Onyx is a glossy, porous material that requires special handling and gentle cleaning. Remove dirt, grime and grease from onyx without damaging it. To clean your onyx surfaces with this technique, you need soft cloths, a towel, mild dish soap, warm water and stone cleaner. It takes roughly 15 minutes to clean the stone and six hours for the sealant to harden.Full Answer >