To clean the rubber seal on a washing machine, use a clean rag and a spray bottle filled with a 10:1 ratio of water to bleach. It may also be necessary to reach behind the seal and remove hidden mold or mildew with the damp rag.Know More
The rubber seal on front loading washing machines helps to keep water from leaking out, but also serves as a hiding place for mold, mildew, and dirty water to collect. To help keep the laundry coming out clean it is important to periodically clean this seal using the following steps:
Mix together a ratio of 10 parts water to 1 part bleach in a spray bottle. Gather a couple of clean rags for wiping down the seal.
Use one of the rags to remove visible mildew or mold from the top and underside of the rubber seal. It may be necessary to get between the sides of the seal and the washing machine to wipe away hidden mildew.
Spray down the entire rubber seal with the bleach and water mixture. Remember to spray between the sides of the seal and behind it with the mixture. Wipe it clean with the second rag.
To remove odors, dirt and dust from the rubber lining of a washing machine, wipe down the rubber door gasket with hot soapy water or spray mildew cleaner on a cloth and wipe down the lining. A mixture of three parts hot water and bleach can also be used.Full Answer >
Use a washing machine by adding detergent, filling the machine with clothes, setting the temperature, selecting the correct cycle and starting the machine. Once you start the machine, it completes the cycle, and your clothes are ready to dry.Full Answer >
A washing machine typically uses 350 to 500 watts of power. The specific wattage for most washing machines is found on the nameplate, which is typically located on the bottom or back of the appliance. The washer's wattage indicates the maximum power drawn by the appliance.Full Answer >
A clogged or damaged water inlet valve can prevent a washing machine from filling up properly. Remove the valve from the machine to clean it properly or replace it if necessary. Tools for removal and cleaning include pliers, a screwdriver, soap and a scrub brush. The time required may range from 30 minutes to 2 hours.Full Answer >