To connect a pool vacuum to a filter, adjust the pool water level, and clean and block all skimmer baskets except the skimmer containing the rubber stoppers. Switch off the power supply to the pool, and attach the vacuum. Fill the hose with water, and attach the skimmer.Know More
Adjust the pool water to a mid-skimming level. Clean the skimmer baskets, and block them off, except the skimmer basket that contain the rubber stoppers. Flip off the electric supply to the pool, and turn the filter setting to the pool vacuum.
Attach and lock the swivel end of the hose into the vacuum head. Insert the handled pole into the handle bracket found at the vacuum head, and secure the handle with pushpins so the handle does not pull away when vacuuming.
Set the vacuum head on the pool bottom, and put the hose in the pool, holding onto the free end of the hose. Feel the entire hose with water, and attach the skimmer to the free end of the hose. Fit the skimmer plate on the skimmer basket, and then vacuum the pool.
Backwashing a swimming pool sand filter involves setting the pump on backwash and rinse, cleaning out the skimmer and hair catcher and resetting the pump. Backwashing is part of regular pool maintenance, and experts recommend doing so once a week or twice if the pool is used heavily.Full Answer >
To change the sand in a pool filter, open the filter, disconnect the plumbing attached to the valve, remove the multiport, dig out the sand, clean the laterals, and add in new sand. Change the pool sand once every five years for optimum efficiency.Full Answer >
Hayward makes a range of pool filters, and only some of these filters require backwashing. The filters that do require backwashing are often fitted with the Hayward Vari-Flo multiport valve. To backwash the filter, the valve needs to be turned to the "BACKWASH" position.Full Answer >
Clean your swimming pool filter by removing all elements and rinsing them. Next, soak the elements in a cleaner. Finally rinse with an acidic solution and reassemble.Full Answer >