Q:

What is the equivalent of the L1154 battery?

A:

A L1154 battery is a 1.5-volt alkaline button cell battery of the LR44 specification. Various manufacturers call this battery by different names, making it difficult to find an exact replacement without looking at a comparison chart. Some equivalents are: 1128MP, 1166A, AG13, D76A, G13A, GPA7, GPA76, LR44, LR1154 and L1154.

In the LR44 battery type, the letter L denotes that the electrochemical system uses a zinc negative electrode, a manganese dioxide depolarizer and a positive electrode with an alkaline electrolyte. The R44 indicates a round cell 11.4 ± 0.2 millimeters in diameter and 5.2 ± 0.2 millimeters in height, as defined by IEC standard 60086. A SR44 battery is similar to an L1154 but uses silver oxide as the electrolyte and provides more electrical capacity.

Learn More

Related Questions

  • Q:

    How do you magnetize a screwdriver?

    A:

    To magnetize a screwdriver, clean the screwdriver shaft, and run the shaft along a magnet, working from the base of the shaft to the tip. Test the screw for magnetism, and repeat the process if needed. You need a strong magnet to achieve a strongly magnetized screwdriver.

    Full Answer >
    Filed Under:
  • Q:

    Why won't my Toro lawnmower start?

    A:

    Fresh fuel is a key to quick starting of a Toro lawn mower, according to the company's website. As gasoline sits in the fuel tank, the more volatile compounds tend to evaporate. Emptying the tank and refilling with fresh gasoline often solves the problem of a mower that does not start. At the end of the mowing season, any remaining fuel should be emptied from the tank.

    Full Answer >
    Filed Under:
  • Q:

    How did Allen keys get their name?

    A:

    Allen keys got their name from the Allen Manufacturing Company in Hartford, Connecticut. These tools are also known as Allen hex wrenches, Allen wrenches and Allen L-keys.

    Full Answer >
    Filed Under:
  • Q:

    How do you sharpen a chainsaw chain?

    A:

    To sharpen a chainsaw chain, adjust the tension, secure a file guide to the chain bar, and file each cutter with a round file for five to seven strokes. Check the height of the depth guides, and file them with a flat file if necessary.

    Full Answer >
    Filed Under:

Explore