Q:

What are the error codes for a Maytag Neptune washer?

A:

Error codes for the Neptune front loading washing machine include the codes DO, FL, LO, LR, ND, OD, SD, DF and NF. Error codes can indicate minor or serious issues with the washing machine.

For instance, the DO code indicates the door is open or the door lock has failed to engage. To remedy the DO error code, open the door and shut it again. The FL code indicates the door monitor is malfunctioning, while the SD error code indicates the washing machine has detected too much laundry soap has been used and the machine contains too many suds.

All codes may indicate the need for repairs. For instance, the OD and DO codes both indicate an issue with the door and may require installing a new door lock. The codes LR and NF are definite indicators that the Neptune washing machine may need repairs. The LR code indicates a failure in the motor, while the NF code indicates the washer isn't filling with water. The PF error code shows that the power to the machine was abruptly disconnected during the previous cycle. The PF code usually occurs during the first use of the Neptune washer. Resetting the error code using the pause, cancel or power button clears previous errors, according to Maytag.


Is this answer helpful?

Similar Questions

  • Q:

    What are some Calypso washer error codes?

    A:

    Error codes for a Whirlpool Calypso washing machine include PF (power failure), FL (overfill), Er (processor reset), LF (long fill), CE (communications error) and Ld (long drain). They also include CA or CI (current limit trip), ob (off balance), Sr (stuck relay), LS (lid switch) and SL (suds lock).

    Full Answer >
    Filed Under:
  • Q:

    How do you drain a Maytag Neptune washer?

    A:

    A Maytag Neptune washer that does not drain properly may have a faulty water pump or an obstruction blocking the pump, explains Mary Marlowe Leverette on About.com. If the pump has no obstruction, it may need replacing. The standing water may be removed by unclamping the drain hose and directing the water into a container.

    Full Answer >
    Filed Under:
  • Q:

    What are the Whirlpool Duet Washer error codes?

    A:

    The error codes that appear on the Whirlpool Duet washer include "F/H," "F/02," "F/05," "F/06," "F/07," "F/09," "F/10," "F/11," "F/13," "F/14," "F/15," "Sud," "F/dL" and "F/dU." Each error code indicates to the user a different potential problem with the washer or load being washed.

    Full Answer >
    Filed Under:
  • Q:

    How do you reset the error codes for an LG washer?

    A:

    Reset error codes on an LG washing machine by unplugging the machine, pressing the start/hold button for approximately five seconds and reinserting the power plug into the outlet. Before unplugging the machine, take note of the error code it displays.

    Full Answer >
    Filed Under:

Explore