Fixing loose connections in the pipes typically tackles the problem, according to Do It Yourself. Inspect the seals and pipes where necessary by detaching the drain basket and drain pipe with a wrench to unlock the washer. If any cracks are seen on the seals and pipes, then replacement is necessary.Know More
Do It Yourself further notes that dismantling the drain is necessary for leaks under kitchen sinks caused by blockage. Remove the strainer, which is part of the sink basket, with pliers. Take out the drain basket and apply sealant underneath it. The water basin should be sealed at the top as well with a caulk gun. The parts should be reassembled, and the sealant should be smoothed. Reassemble the drain pipe with extra sealant and tighten the connections as well. Sealants typically take up to 3 days to dry. If there are leaks in the pipes, then reapply the sealant where necessary.
SF Gate mentions that the method of fixing a leaky sink depends on the type of sink, but common solutions include fixing gaskets or the washers. Tightening the compression fittings for shut-off valves is another option, and adjusting faucet connections with locking pliers may be necessary. An auger should be used for drain-line blockage. Dismantling and applying plumber's putty on the sink drain works as well for blockages.Learn more about Plumbing
Unclog a sink by pouring boiling water down the drain, filling the sink with 2 inches of hot water and then plunging with a cup plunger. If you have a double kitchen sink, have a helper hold the stopper in the second basin before plunging. Flush with hot tap water.Full Answer >
Push-fit plumbing uses specially designed valves, couplings, connectors and other pipe fixtures to join pipes without using clamps, glue, soldering or unions. A push-fit connector uses metal teeth to grip an inserted pipe and forms a watertight seal with a compression fitting O-ring once the pipe hits the tube stopper.Full Answer >
To repair a pinhole leak on a copper pipe, first turn off the water, drain the pipes, cut out the affected area and solder on a new pipe coupling. Using a coupler is acceptable for pinhole leaks where less than 1/2-inch of pipe needs to be removed.Full Answer >
Frozen water pipes can be thawed by shutting off the main water valve, opening the faucets and applying heat to the frozen pipe. Pipes often freeze when the temperature drops during the winter and no insulation is available to prevent water from turning to ice in the plumbing system.Full Answer >