To fix a stinky sink drain, flush it with baking soda and vinegar. Unscrew the sink trap slip nuts, remove the trap, scrub it, brush the pipes, and remount the trap, This 90-minute process requires baking soda, a bucket, a wrench and a pipe brush.Know More
Pour 1/2 cup baking soda into the drain, and rinse it out with hot water.
Place a bucket beneath the J-shaped pipe located below the sink. Use a wrench to loosen the slip nuts, finish loosening them by hand, and remove the J-shaped sink trap.
Rinse the trap thoroughly, take it to another sink, and scrub it with hot water until it is free of food particles and does not have an unpleasant odor.
Use a wire pipe brush to clean the exposed pipes that connect to the trap. This removes soap scum and the malodorous food residue that contributes to drain odor.
Slip the nuts over the ends of the trap, hold it in its proper position, and tighten the nuts with your hands. Finish tightening them with the wrench to ensure that a watertight seal is created.
To unblock a sink without a plunger, use a clog-removing product such as Drano or a mixture of baking soda and vinegar. To remove stubborn blockages, try using a drain snake.Full Answer >
Remove the tank lid and perform a visual inspection of the toilet flush valve to start addressing any issues or problems the toilet may be having. Adjust the flapper or tension chain to ensure the flush valve is able to form an effective seal. Drain the toilet tank and replace the flush valve to address a leaking flush valve.Full Answer >
Open a clogged drain with baking soda by adding an equal amount of vinegar to the baking soda inside the drain, and then flushing the drain with boiling water. Depending on the severity of the clog, you may need to repeat this process more than once.Full Answer >
Fixing loose connections in the pipes typically tackles the problem, according to Do It Yourself. Inspect the seals and pipes where necessary by detaching the drain basket and drain pipe with a wrench to unlock the washer. If any cracks are seen on the seals and pipes, then replacement is necessary.Full Answer >