Q:

What does an inside dryer vent do?

A:

An inside dryer vent removes heat exhaust from the dryer when a vent outside the home is impossible or impractical. By installing a hose from the back of the dryer to the inside dryer vent, heat is recirculated and reduced, and vent discharge is captured.

Inside dryer vents perform the same function as outside vents. Apartments or other dwellings without a readily available outside wall often vent the dryer through the attic. This process necessitates the use of a long hose, which can create a fire hazard if lint builds up in the hose. Using an inside dryer vent reduces the length of the hose and the potential fire hazard.

Sources:

  1. doityourself.com

Is this answer helpful?

Similar Questions

  • Q:

    How do you clean a dryer vent?

    A:

    The best method of cleaning out the dryer duct is to use a dryer vent cleaning brush kit and a vacuum with an upholstery attachment. By dismantling the ductwork, the vent can be completely cleared of lint.

    Full Answer >
    Filed Under:
  • Q:

    How do you vent a clothes dryer?

    A:

    Proper venting of a clothes dryer includes use of an approved connection to a vent leading to the outside of the house. The maximum distance from the location the vent exits the dryer to where the vent empties to the outside air is 25 feet, though this number is reduced by 5 feet for every 90-degree bend and 2.5 feet for every 45-degree bend, according to The Family Handyman.

    Full Answer >
    Filed Under:
  • Q:

    What is a dryer vent fan?

    A:

    Dryer vent fans, also called dryer booster fans, increase airflow, shorten drying times and prevent lint buildup in dryer ductwork. Dryer boosters are recommended and may be required, depending on local building codes, when ductwork exceeds 25 feet or 10 feet with three or more bends.

    Full Answer >
    Filed Under:
  • Q:

    How do you fit a tumble dryer vent?

    A:

    The fitting of a tumble dryer vent starts by ensuring that the water supplies are turned off at the mains and that all water remaining in the piping is allowed to drain away. This is accomplished by running a tap until no more water comes out of the pipe. After this comes fitting the back end of the vent into the tumble dryer.

    Full Answer >
    Filed Under:

Explore