To install mobile home skirting, mark the location of the rails, nail the back rail to the bottom edge of the house, drive spikes through the bottom rail, trim the panels, and fit them into the rails. To finish, attach the top front rail.Know More
For the back rail, place one piece along the bottom edge of the home so that the bottom edge of the rail is just below the edge of the home. With a level, mark a chalk line along the top edge of the rail, and continue marking the line around the home. For the bottom rail, measure a plumb line with a level or plumb bob at every corner. Then mark each corner of the home where the corner is plumb to the ground, Make chalk lines connecting the corners.
Align the back rail with the chalk line on the home. Place a screw or nail in every other slot, and leave a 1/16-inch space to allow for expansion and contraction. Between rails, keep a 1/2-inch gap.
Position the bottom rails on the ground along the chalk line. Hammer ground spikes into the rails every 19 inches.
Measure and cut the vinyl panels to 1 1/2 to 3 inches taller than the distance from the ground to the home. Every 4 inches along the top and bottom, punch holes with a snap lock punch tool. Then fit the panels into the rails.
Snap and interlock the top rail onto the back one. At the corners, trim a 1-inch V-shape from the top part of the top rail. Bend and fit the rail around the corners.
Hourly rates for house painters can vary by location and depend on the cost of materials, amount of labor and square footage of the home. Contact local painters to determine the average hourly cost for a specific region.Full Answer >
Install a grab bar in a bathtub by locating the wall studs, marking the location of the screws and predrilling the holes for the screws. Use the screws to attach the mounting hardware to the wall, and then attach the grab bar to the hardware.Full Answer >
The Home Depot sells a wide variety of wall panels, including fiberglass, plank paneling, tile board and wood paneling. Of the four paneling options, plank paneling options are the most numerous with over 90 different choices. Wood paneling is second with around 30 options.Full Answer >
To move a used mobile home, research, locate and hire a reputable moving company, and prepare the mobile home for the move. If insurance is not included in the services of the company you choose, research and purchase insurance to cover any property damage that the move may potentially cause.Full Answer >