When changing the oil in a pressure washer, use oil that is specifically formulated for the unit, rather than standard vehicle oil. The oil is designed to lubricate the water pump under high pressure.
The water pump oil needs to be changed at least once a year or after 50 hours of washing. Prior to changing the oil, clean the washer of any contaminants by removing the spray nozzle and allowing water to flow through the wand for at least two minutes. Empty the old oil into an appropriate container and pour in the new oil. Some pressure washer models include dipsticks to measure oil, while others simply use an entire bottle of the specially formulated oil.Learn More
Fondue fountains using 5 pounds of chocolate require approximately ½ cup of vegetable oil. Some chocolate brands, such as Sephra, do not need any oil to ensure a smooth texture.Full Answer >
A car's oil pressure sending unit detects the amount of oil pressure in a car's engine and sends that information to the car's instrument panel. It allows the driver to monitor oil pressure and receive a warning of dangerous pressure levels.Full Answer >
To replace the o-ring washer on a mixer tap, you need to remove the retaining nut and fittings, lift the tap from the faucet, remove the o-ring and replace it with a new one. Then, reverse the steps to reassemble the tap.Full Answer >
Troubleshoot a Kenmore Washing Machine 110.92573210 by identifying the symptoms. Check first for the most common causes of the problem, moving down to less likely causes. After identifying the cause, either repair or replace the problem component.Full Answer >