Lap joints can be used to build drawers, desks and dressers. They can also be used for building a cabinet or sideboard face. Many applications that require two pieces of wood to be joined together can be performed by creating a lap joint.
The half-lap is a basic woodworking joint but is also useful for binding together two pieces of wood stock. Lap joints can be done in a number of ways, including a half-lap, center lap or mitred lap. They are especially well suited for applications involving the connection of two pieces of wood at a right angle. Lap joints are not necessarily the best solution for applications involving thin pieces of material, particularly if a half-lap joint is being used.Learn More
According to Norboard, I-joist installation requires special tools, flexible planning and an understanding of framing techniques. It is not a simple job. An I-joist is an engineered joist that is stronger than the wooden variety. However, it does require some care during installation in order to function properly. Before installing an I-joist, read the manufacturer's instructions and technical guides.Full Answer >
An easy method for building a sawhorse requires cutting 2x4s into short lengths and assembling them in an A-frame using 3-inch screws. This project takes approximately one hour to complete. Use a compound miter saw and an impact drill to make the sawhorse quickly.Full Answer >
To distress wood, use a commercial sander that is fitted with a distressing disk. Hand tools, such as a soldering iron, screwdriver, hammer or wire brush, are also effective in distressing a wood floor.Full Answer >
To build your own mobile home, you need to create or buy plans, then purchase a trailer on which to build the home, buy materials and fixtures, and construct the home. You'll need about $30,000 to buy the plans, a trailer and the building materials. You'll also need to buy or borrow tools if you don't already have them. The project will take several months to a year.Full Answer >