Q:

What does a load-bearing wall look like?

A:

Load-bearing walls look like other walls on the outside but have several distinctive features inside the drywall that differentiate them from other walls. The direction the wall runs, the type of wall header, and the wood framing used at the top of doorways are all features used to identify load-bearing walls.

Load-bearing walls run the same direction as the roof ridge. They also run perpendicular to the floor joists. Floor joists can easily be inspected in homes with a basement. Access to a crawl space is necessary in homes without a basement.

Load-bearing walls employ wall headers that are larger than usual, called doubled top plates. If drywall has been installed, it is necessary to remove a section of it to inspect the wall header. The wall header runs horizontally along the top of the wall. Doubled top plates give load-bearing walls more strength.

In walls that have doorways, the drywall can be removed above the door to find load-bearing walls. In load-bearing walls, doubled 2-inch-thick lumber is used with a strip of plywood between the two layers. This compensates for the loss of strength from missing studs.

All exterior walls of a home are load-bearing. Most homes generally have at least one interior load-bearing wall, and larger homes have more.

Learn More

Related Questions

  • Q:

    What color should I paint the outside of my house?

    A:

    Choosing a paint color for the outside of a house largely depends on personal preference, overall budget and color availability at local paint stores. It's important to choose paint made specifically for exterior surfaces, as that type of paint is made to withstand climate changes. Some common exterior paint colors for predominately cold climates are brown, white, navy blue and gray. Warm climate colors include light blue, orange and beige.

    Full Answer >
    Filed Under:
  • Q:

    How do you fix cracks in drywall?

    A:

    Cracks that appear on drywall can easily be repaired over a day or two. What you need for this repair is a mud pan, a dusk mask, painters tape, a utility knife, a 6-inch knife, a 12-inch taping knife, paper drywall tape, pre-mixed joint compound and setting-type compound.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove drywall anchors?

    A:

    Removing drywall anchors is a simple process that only takes a few minutes, though it may require later patching of the wall with putty. In order to remove drywall anchors from your home, you need a screwdriver, a hammer and a pair of pliers.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove bumps in drywall spackle?

    A:

    Spackling is an easy method for patching holes in drywall. Usually, a thin layer of spackle is spread over the hole or crack using a flat-edged putty knife. Avoiding and removing bumps in drywall spackle after patching up the wall is a straightforward process that involves few steps.

    Full Answer >
    Filed Under:

Explore