According to LovetoKnowCrafts.com, Ivory soap can be used to make soap without lye. The method is similar to melt and pour method, except that it begins with mixing together all additives while boiling in water. The mixture is then poured onto small cut pieces of ivory soap and mixed well. Once dry, it can be used as soap. A soap without lye can also be made using melt and pour soap techniques. All it requires is a natural soap base like glycerin, which is easily available in the market. Other additives like fragrance oils, vitamins and colors are added at the discretion of the soap maker.Know More
Start by melting the soap base in a boiler. Stir the melted base to ensure that there are no solid pieces remaining.
Once the base is melted, add all of the desired additives to the mixture. The fragrance oil, when added, must be stirred into the base. Continue stirring until the oil is completely mixed with the base and there is no cloudy appearance to it. All other additives can be added straight to the mixture.
Pour the mixture into a soap mold, and spray it with rubbing alcohol to eliminate any extra bubbles. The soap hardens and is ready for use in a few hours.
Sodium stearate is primarily used to make soap. This element is the sodium salt derived from stearic acid, and it appears as a white solid in transparent soaps. Sodium stearate is mostly used to create soap bases, but it is also used to produce deodorants, latex paints, rubbers and inks, and to a lesser extent, food additives and flavorings.Full Answer >
Soap scum is a white solid film that forms on surfaces in bathrooms when the chemicals in soap interact with hard water, body oils and mildew. Other components of soap scum can include human hair, dead skill cells and dust or dirt.Full Answer >
To get rid of soapsuds in the dishwasher, cancel the cycle to allow the machine to drain, and unpack the dishes once it's safe to do so. Pull out the bottom drawer, pour table salt on the suds, and run a quick-rinse cycle.Full Answer >
Clean soap scum by applying a solution of dishwasher detergent and water to the shower walls and then scrubbing the walls with a nylon brush. Heavy buildups require a second application. The process takes about an hour.Full Answer >