Place a 3/8-inch plywood board on the box spring, and set the mattress on top of the board to create a firm resting place. You need an electric saw, measuring tape, a marker, sandpaper and the mattress.
Measure the length and width of the mattress. Use these measurements when purchasing a large plywood board. Depending on the mattress size, you may have to purchase two plywood boards and place them beside each other on the box spring.
Place the plywood on the box spring. If it requires cutting, set the plywood on the floor, and place the mattress on top of it. Use the marker to trace the mattress curves onto the board. Take the plywood outside, and use an electric saw to cut the plywood into shape. Use sandpaper to smooth the edges.
Bring the plywood inside, and set it on the box spring. Place the mattress on top of the plywood, and cover the mattress with bedding.
Lie on the bed to test its firmness. Roll from one side to the other to check for dips. If the bed is not firm enough, add another plywood layer.
A soft mattress may lead to uncomfortable nights and a lack of restful sleep. A common signal of a soft mattress is back pain. A bed board improves firmness by providing solid support beneath the mattress.Full Answer >
With a measurement of 76 by 80 inches, a king bed is wider than the queen bed, which is 60 by 80 inches. The king is not the largest of all beds. A California king bed measures 72 by 84 inches, while a grand king measures 80 by 98 inches.Full Answer >
Hardside waterbed frames are made of wood and encase the waterbed mattress on all sides. The frame sits atop a pedestal base, also made of wood.Full Answer >
The standard queen-size bed mattress is 60 inches wide. It is a mid-size bed suitable for two people. However, it does not give as much individual space to each person as a twin bed does to one person.Full Answer >