A washing machine with a 3-cubic-foot drum holds 22.4 gallons of water. Such machines use up to 50 gallons of water per wash cycle, and the average family operates such a machine up to 300 times per year.
Machines with ENERGY STAR certification have larger tubs but use 15 gallons or less per load, a reduction of 35 percent over standard washers. They are available as units that look like traditional top-loading washing machines and as front-loading machines. These machines flip or spin clothes through a stream or puddle of water for cleaning instead of filling the tub. They also require less energy to operate.Learn More
When installing a washing machine, always connect the water hoses on the washer to the water source in the laundry room. Look for two water faucets marked "hot" and "cold". The washer has two hoses. Connect each hose to the corresponding faucet - "hot" to "hot" and "cold" to "cold".Full Answer >
A clogged or damaged water inlet valve can prevent a washing machine from filling up properly. Remove the valve from the machine to clean it properly or replace it if necessary. Tools for removal and cleaning include pliers, a screwdriver, soap and a scrub brush. The time required may range from 30 minutes to 2 hours.Full Answer >
To plumb in a washing machine, you need to connect the drain and level the machine. If you choose a new location, you might also need to get an electrical outlet.Full Answer >
According to Simply Good Stuff, dirty residue in a washing machine is usually caused by either insufficient cleaning or mechanical failure. Simply Good Stuff notes that better cleaning, as well as vigilant inspection of the washing machine, can help eliminate dirty residue.Full Answer >