Covering the wall behind a wood stove with a material that acts like a heat shield protects combustible material such as drywall from catching fire. Use foil-covered fiberglass duct board, ceramic tile, sheet metal to protect walls around a wood stove.Know More
Foil-covered fiberglass duct board is available at hardware and heating supply stores. Because this product is developed to withstand the heat produced by a furnace, it is suitable to protect a wall against the heat from a wood stove. Purchase a sheet of foil-covered fiberglass duct board and cut it to fit the wall. Install the board by securing it to wall studs with aluminum roofing nails. Finish the surface with heat-resistant paint.
Ceramic tile offers an attractive and protective wall finish behind a wood stove. Sheet metal also protects walls from damage from heat. Both of these options require erecting a spacer between the heat shield and the wall, allowing air to circulate. Ceramic tile or sheet metal is then applied to the surface of the spacer.
Commercial heat shields are available from hardware stores and retails stores that specialize in fireplace and wood stove products. Installation requirements vary, so it is important to always follow the instructions provided with the unit.Learn more about Heating & Cooling
Wood-burning stoves operate at high temperatures. Care must be taken during installation to prevent possible damage to surrounding structures. The stove should be located in a suitable spot with non-combustible surroundings. A chimney must be installed to remove smoke.Full Answer >
Using a wood stove requires proper ash management, placement of wood and circulation of air. In order to get started, all you need is wood, source of ignition, a shovel and metal bucket.Full Answer >
To build a wood stove hearth pad, create a template to the correct size, then create a wooden frame with 1-by-2 lumber. Fill the bottom of the frame with 1/2-inch plywood, and fill the frame with bricks. Pour liquid cement between all the bricks, and dry completely.Full Answer >
Floor and wall protectors for wood stoves are called thermal barriers. Correctly installing an appropriate thermal barrier allows the stove to be placed closer to the wall. For areas without thermal barriers, the recommended clearance is 36 inches from each wall.Full Answer >