Q:

What does it mean when a washing machine will not wring out the clothes?

A:

When a washing machine fails to wring out clothing, it is likely experiencing problems with its spin cycle. Such problems result from issues with the washer's clutch, machine lid switch, motor, transmission, or, most commonly, belt or unbalanced load, according to RealEstate.

West Los Angeles Washer & Dryer Repair Service reports that sometimes top-loading washing machines fail to spin owing to a defective washing machine lid switch. This switch which is located near the door frame inside the machine's primary housing, is easily replaced. If the problem is a belt, it is important to replace it with a belt from the appropriate manufacturer.

Front-loading washing machines fail to spin for other reasons, including problems with the door lock, according to West Los Angeles Washing & Dryer Repair Service. A clogged water pipe can also prevent a front-loading washer from spinning. If this is the case, the solution is to clean out the pump trap.

RealEstate recommends that when diagnosing problems with a machine spin cycle, check the simplest possibilities first, such as an unbalanced load or worn or broken belt. It also notes that it is important to unplug the machine from the electrical outlet when working on moving parts.


Is this answer helpful?

Similar Questions

  • Q:

    How do I plumb in a washing machine?

    A:

    To plumb in a washing machine, you need to connect the drain and level the machine. If you choose a new location, you might also need to get an electrical outlet.

    Full Answer >
    Filed Under:
  • Q:

    How do I connect a washing machine?

    A:

    Connecting a washing machine is a simple process, especially if it is just replacing an existing washing machine. Replacing a washer consists of only three steps and uses only water pump pliers and a level. Before connecting a new washer, the proper plumbing and electrical connections must be installed. However, the steps after that point are the same. Remember to turn off the water and electrical connections before installing any washing machine.

    Full Answer >
    Filed Under:
  • Q:

    Why is there dirty residue in my washing machine?

    A:

    According to Simply Good Stuff, dirty residue in a washing machine is usually caused by either insufficient cleaning or mechanical failure. Simply Good Stuff notes that better cleaning, as well as vigilant inspection of the washing machine, can help eliminate dirty residue.

    Full Answer >
    Filed Under:
  • Q:

    How do you clean a washing machine of soap scum?

    A:

    Soap scum can be removed from a washing machine by cleaning, sanitizing and deodorizing the machine. The materials you need to clean out the soap scum are 6 cups of white vinegar, 1 quart of chlorine bleach, cotton swabs and warm water.

    Full Answer >
    Filed Under:

Explore