If you want to tear down your house but leave the basement and foundation intact, it costs between $3,000 and $8,000 as of 2014. This figure is for homes located in the United States in low-cost areas, and includes debris removal. However, to tear down a house in a city where the cost of living is higher, the cost jumps to between $7,000 and $15,000.Know More
If you want to tear down the entire house, including the basement and foundation, the project costs a little more. The cost to tear down an entire house is between $10,000 and $25,000, but this also depends on the materials. This price also fluctuates depending on how big the house is and the contractor hired for the project. If there is lead paint or asbestos in the house, expect the cost to rise further.
Additionally, there are other costs to consider, including demolition permits, which can cost between $25 and $100. However, if you live in an populated area, such as Chicago, and are tearing down a house, the permit to do so may cost up to $10,000 because of local rules and regulations. You also may have to pay utility companies to come out if necessary.Learn more about Home Maintenance
To fix low ceilings in a basement, homeowners can typically either lift the whole house or dig the basement down. While building codes vary, most basements need ceiling heights of at least 7 feet. Consult with a building inspector and contractor before beginning work to ensure all codes are met.Full Answer >
An efficient way to paint basement stairs is to paint every other stair, allowing you to stand or sit on a dry stair each time you paint one. Starting at the bottom and working your way to the top prevents you from being trapped in the basement during the drying time.Full Answer >
The ideal humidity for a basement, finished or unfinished, is at or below 50 percent relative humidity. Relative humidity is the percentage of water vapor in the air as compared to the maximum amount it can hold. At 50 percent humidity or below, mold does not propagate.Full Answer >
To paint a basement floor, repair any cracks in the floor, sweep and wash the floor, apply epoxy-based primer and apply two layers of epoxy paint. You need to preheat the floor to between 50 and 90 degrees Fahrenheit before painting.Full Answer >