Q:

How do you paint cabinet hinges?

A:

Quick Answer

In order to paint cabinet hinges, remove any old paint and apply primer and new paint. Use primer and paint designed for metal.

Know More

Full Answer

Painting cabinet hinges is a simple process.

  1. Prepare the hinges
  2. Carefully remove the hinges from the cabinet and gently scrape any visible hunks of built-up paint or varnish out of the crevices in the hinges. Put the hinges in a slow cooker, submerged in soapy dishwater, and cook them on high-heat overnight. Gently scrape the old paint off, and then sand the hinges to rough up the surface a bit.

  3. Prime and paint
  4. Use spray-on metal primer and paint. Apply a thin coat of primer, then let it dry completely before applying a generous coat of paint. When completely dry, the hinges can be re-installed in the cabinets.

Learn more about Home Maintenance
Sources:

Related Questions

  • Q:

    Can you paint a bathtub?

    A:

    Bathtubs can be painted, but it is important to prepare the old surface properly, apply a primer, and use an acrylic polymer paint or epoxy specifically designed for bathtubs. The new paint does not adhere properly if the existing surface is not thoroughly cleaned and sanded.

    Full Answer >
    Filed Under:
  • Q:

    How do you paint Formica?

    A:

    To paint Formica and other laminate surfaces, sand the Formica, then apply a primer or paint designed to adhere to smooth surfaces, and seal the paint with high-gloss acrylic sealant. Some paints require priming first, while others can be applied directly to the Formica.

    Full Answer >
    Filed Under:
  • Q:

    How should you paint wall paneling?

    A:

    The major difference between painting indoor paneling and painting a regular wall is that indoor paneling needs to be sanded before the primer or paint can be applied. Paneling is harder for paint to adhere to than a typical painted wall.

    Full Answer >
    Filed Under:
  • Q:

    How do you paint a fiberglass shower?

    A:

    To paint a fiberglass shower pan, remove the caulk, sand and scrub the pan, apply primer and paint, and apply caulk. You need a knife, protective gear, caulk remover, pliers, water, muriatic acid, a vacuum, a brush, rags, alcohol, sandpaper, masking tape, a paint sprayer, primer, epoxy paint and caulk.

    Full Answer >
    Filed Under:

Explore