Paint light bulbs using glass paints that can withstand heat. Secure the metal screw with tape, apply the paint on the bulb with a small paint brush, let the paint dry, remove the tape, and screw the light bulb in place.Know More
Take the bulb, and secure the metal portion that goes into the power socket with painter's tape. If painter's tape is not available, use ordinary tape or any similar material to keep this part covered during painting.
Make sure that the paint can withstand the heat of the light bulb before applying it. Thoroughly shake the paint jars to ensure uniform color and consistency. Hold the light bulb by the metal screw portion. Then, dip a small paint brush in the paint, and apply it over the light bulb. Make sure that the paint is applied evenly and there's no excess paint on the bulb. Let the paint dry. If multiple paints are to be applied on the bulb, apply one color, and wait for it to dry. Once the paint has dried, take another small paint brush, and apply the new paint over the dry layer of paint.
Once the applied paints have dried, remove the tape covering the metal screw of the bulb. Screw it in the socket, and turn it on.
Paint safely while pregnant by getting permission from your physician, wearing protective clothing, ventilating the area well, and limiting exposure. Keep food and drinks out of the area, use paints that don’t contain harmful chemicals, and don’t scrape or sand old paint.Full Answer >
Paint dries darker than it appears on the swatch or paint chip. When paint is wet, it appears lighter than when it's dry. The type of paint also affects its lightness or darkness.Full Answer >
Some paints, including aerosol and oil-based paints, are flammable. Water-based paint, such as latex, acrylic or vinyl paint, and many artists' paints are not flammable.Full Answer >
Light a pilot light with a match. Fine wire might also be required to clean the pilot opening if the flame fails to remain lit.Full Answer >