Q:

How do you get paint off hardwood floors?

A:

Quick Answer

Removing paint from a hardwood floor is a process that takes differing amounts of time depending on the amount and type of paint that has been spilled. Items needed are a putty knife, hair dryer, rag and mineral spirits.

Know More
How do you get paint off hardwood floors?
Credit: Tara Moore Stone Getty Images

Full Answer

  1. Scrape with putty knife

    Using a putty knife, gently scrape around the paint stain on the floor. Some types of paints, especially those that haven't been cured yet, can be removed with a simple scraping. However, if the paint stain isn't removed with the putty knife, the paint may need to be warmed up.

  2. Warm the paint

    Turn on the hair dryer and apply it directly to the paint stains. After the paint has had some time to warm up, try using the putty knife again. Depending on the type of paint, this may be enough to get the paint loose enough to remove it. If not, then solvent may be needed.

  3. Apply mineral spirits

    Lightly dampen a rag with the mineral spirits. Then, delicately dab at the stain. The use of this solvent should be enough to get most paints off of hardwood floors and out of crevices. However, solvents can be damaging to floors and should be used as infrequently as possible.


Is this answer helpful?

Similar Questions

  • Q:

    How do you get paint splatters off of wood?

    A:

    The exact chemicals needed to remove paint splatters from wood depend upon the type of paint. For example, latex paint can be removed with basic household cleaners, while oil paints require a commercial paint thinner. Additional materials include sandpaper, an abrasive scrubber and a paint scraper. Work in a well-ventilated area, and use a ventilator mask, protective glasses and rubber gloves as needed.

    Full Answer >
    Filed Under:
  • Q:

    What are waxed hardwood floors?

    A:

    A waxed hardwood floor is one where a wax is applied to the hardwood floor to protect the floor and give it a shiny appearance. Waxed floors were popular in the '40s, '50s and '60s.

    Full Answer >
    Filed Under:
  • Q:

    What are the best ways for restoring hardwood floors?

    A:

    A hardwood floor can be refinished by sanding the top layer of finish, then applying a new coat of finish. It is not always necessary to sand down to bare wood to refinish a floor. However, as Lowe's points out, it is important to determine how deep a refinishing job is needed before starting.

    Full Answer >
    Filed Under:
  • Q:

    How do you repair dents in hardwood floors?

    A:

    Repairing dents on a hardwood floor entails using steam to reshape the fibers of the wood. For this project, you need an iron, a cotton cloth and some water. Danish oil may be necessary as well.

    Full Answer >
    Filed Under:

Explore