To paint a thermofoil cabinet, sand the surface to be painted, add a primer, and apply latex paint. Finish with a sealant for a perfect finish.Know More
First, prepare the surface to be painted. Remove dirt, stains or debris using a damp rag, warm water and homemade detergent. Start sanding the surface of the cabinets only after they are completely dry. Wipe all the dust resulting from sanding using a damp piece of cloth.
Next, ensure that you work in a well-ventilated room and wear protective clothing such as gloves, goggles and a face mask. Then, add a quality bonding primer using a foam roller or a paintbrush to achieve an even coat. Apply another coat of primer, and leave it to dry.
Now start applying latex paint using either a roller or a paintbrush. Paint the cabinets following the same procedure as applying primer. Let the first coat dry, then apply another one for best results. You can apply up to four coats depending on the color you are using. Go for enamel paint if you are looking for a glossy finish. Otherwise, a satin finish works.
Finally, for extra gloss and protection, apply one coat of polyurethane varnish or sealant. Leave the paint to cure for 10 to 30 days before using the cabinets.Learn more about Furniture
It's possible to paint over oil-based wood stain with latex paint if the painter prepares the surface properly. Painters need to remove as much stain as possible by sanding or scraping. Then, they need to clean the surface thoroughly, apply a primer and use high-quality latex paint.Full Answer >
Paint melamine cabinets by removing hardware, sanding the surface, applying primer and painting the cabinets. Painting the melamine brings new life to older, worn cabinets.Full Answer >
To paint over chrome plating, wash the surface, sand it, apply self-etching primer and filler, paint the chrome, and apply sealant. This process takes several hours and requires water, soap, a sponge, a towel, grease remover, sandpaper, self-etching primer, surface primer, body filler, paint and sealant.Full Answer >
Paint cabinets by removing all the hardware and doors, preparing the surface, applying primer, and painting the cabinets. The length of the process varies on the size of the project and needs to allow for drying time. You need a screwdriver, a degreasing cleaner, sandpaper, painter's tape, primer, a paintbrush and paint.Full Answer >